Vishay Intertechnology, Inc.NYSE: VSH

Thick Film Power Resistors Deliver Increased Power Density to Save Space and Simplify Design

· Issued by Vishay Intertechnology, Inc.

Summary by 6ix AI

Vishay Intertechnology, Inc. introduced the Vishay MCB RPWA 650 series of thick film power resistors on August 20, 2026, offering 650 W (watts) of continuous power in a low profile package. Vishay says the devices reduce component counts and the number of parallel resistors needed, saving space and simplifying design and assembly.

Key details

  • The devices combine a power resistor and an optional embedded NTC (negative temperature coefficient) temperature sensor in one housing, with customizable cabling and an easy-mount design with self-calibrating pressure that Vishay says removes the need for board-level soldering.
  • A 'cold system' baseplate design transfers heat to an external heatsink, which is not supplied, and the devices operate over a temperature range from -55 °C to +155 °C.
  • Maximum operating voltage is up to 6000 VDC (volts direct current), dielectric strength (insulation rating) is to 7000 VRMS, typical self-inductance is 40 nH or less, and pulse energy capability is up to 3.5 J per pulse for 50 μs pulses.
  • Tolerances go down to ± 5 %, and Vishay says the series supports circuit functions including precharge, discharge, active discharge, power conversion and snubber operations, for automotive, energy, industrial, medical and avionics systems.
  • Samples and production quantities were available as of August 20, 2026, with lead times of 8 to 12 weeks.

What’s still pending

  • The resistors are pending AEC-Q200 qualification, an automotive industry reliability standard for passive electronic components.

6ix AI wrote this summary from the release below and checked it against the release.

MALVERN, Pa. - Aug. 20, 2026 - Vishay Intertechnology, Inc. (NYSE: VSH) today introduced a new series of thick film power resistors that deliver an industry-leading 650 W of continuous power in a low profile package. Offering customizable cabling and optional temperature sensing integration, Vishay MCB RPWA 650 series devices reduce component counts, saving space while simplifying designs and assembly.

The high power capabilities and compact package of the devices released today allow designers to achieve higher power density, reducing the number of parallel resistors required. Their performance is supported by a "cold system" baseplate design that enables efficient heat transfer to an external heatsink (not supplied), maintaining stable operation over a wide temperature range from -55 °C to +155 °C.

To further streamline designs, RPWA 650 series devices integrate a power resistor and optional embedded NTC temperature sensor in a single housing. Customizable cabling and an easy-mount design with self-calibrating pressure eliminate the need for board-level soldering, reduce wiring and assembly complexity, and enable faster plug and play integration in power modules and assemblies.

Offering a wide range of resistance values from 6.2 W to 1 MW, with tolerances down to ± 5 %, the RPWA 650 series supports a variety of circuit functions, including precharge, discharge, active discharge, power conversion, and snubber operations. The devices are ideal for automotive, energy, industrial, medical, and avionics systems used in harsh environments.

The resistors provide high voltage capability with maximum operating voltage up to 6000 VDC, dielectric strength to 7000 VRMS, and typical self-inductance of ≤ 40 nH. For high voltage and fast-switching circuits, this combination enables accurate energy dissipation and minimizes transient overshoot. The devices also offer high pulse energy capability, supporting repetitive operation up to 3.5 J per pulse for 50 μs pulses. The RoHS-compliant resistors are pending AEC-Q200 qualification.

Samples and production quantities of the RPWA 650 series are available now, with lead times of 8 to 12 weeks.

Vishay Intertechnology, Inc. on 6ix

Story so far

Earlier from Vishay Intertechnology

Later from Vishay Intertechnology

All Vishay Intertechnology news releases