Deep Fission, Inc.NASDAQ: FISN

Deep Fission Prototype Reactor Canister Arrives at Kansas Site, Advancing Reactor Proof-of-Concept Program

· Issued by Deep Fission, Inc. via Business Wire

Summary by 6ix AI

Deep Fission, which is developing small modular pressurized water reactors installed one mile underground, said on July 7, 2026 that its prototype reactor canister has arrived at its Parsons, Kansas site for its Proof-of-Concept Well program. The canister is non-nuclear and will be prepared for testing.

Key details

  • The factory-built prototype canister completed fabrication, hydrostatic testing (pressure testing with water) and delivery to Kansas.
  • The Proof-of-Concept Well is a nearly full-scale program meant to demonstrate a larger-diameter borehole and the full installation process using commercial-grade, non-nuclear components before any fuel is loaded.
  • Deep Fission says its Gravity Nuclear Reactor design places the reactor in a borehole approximately one mile underground, using pressure from the water column above and around it to support operating pressure and cooling.
  • Deep Fission is also working on its full-scale nuclear demonstration borehole and the design of its primary heat exchanger, and is participating in the U.S. Department of Energy's Reactor Pilot Program.
  • Deep Fission was set to ring the Nasdaq closing bell on July 7, 2026 at 4:00 PM ET, marking the canister's arrival and its Nasdaq listing.

What’s still pending

  • Deep Fission is still seeking permits from the Kansas Department of Health and Environment for the non-nuclear borehole, which it expects to be the next major proof-of-concept step.
  • Testing of the canister and the large diameter drilling program are still to come.

6ix AI wrote this summary from the release below and checked it against the release.

-- Company Prepares to Ring Nasdaq Closing Bell Today in Honor of Milestone --

PARSONS, Kan., July 07, 2026--(BUSINESS WIRE)--Deep Fission, Inc. (Nasdaq: FISN) ("Deep Fission" or the "Company"), an advanced nuclear energy company developing small modular pressurized water reactors installed one mile underground, today announced the arrival of its prototype reactor canister at its Parsons, Kansas site, marking a key milestone in the Company's Proof-of-Concept Well program and its Gravity Nuclear Reactor™ development. In celebration of this milestone and its listing on the Nasdaq Stock Market, Deep Fission will ring the Nasdaq closing bell today at 4:00 PM ET.

The factory-built prototype canister completed fabrication, hydrostatic testing, and delivery to Kansas, representing tangible progress toward validating installation, infrastructure readiness, and operational sequencing for the Company's first commercial demonstration well.

"The arrival of our prototype reactor canister at the Kansas site is a clear step forward in moving from design to deployed infrastructure," said Mark Pérès, Chief Nuclear Officer of Deep Fission. "Successfully manufacturing, testing, and delivering this hardware demonstrates performance of our design and supply chain capabilities. Upcoming testing using this hardware will validate our approach and provide valuable learnings as we assemble, install and test key systems under non-nuclear conditions in our large diameter borehole."

The Proof-of-Concept Well is Deep Fission's nearly full-scale validation program, designed to demonstrate a larger-diameter borehole and end-to-end installation workflow using commercial-grade, non-nuclear components prior to fuel loading. The program is intended to validate each stage of underground deployment under real-world conditions while confirming engineering assumptions at scale and supporting the Company's broader commercialization timeline.

The reactor canister is a key component of Deep Fission's Gravity Nuclear Reactor™ design, which places a small modular pressurized water reactor in a borehole approximately one mile underground. The Gravity Reactor™ is based on established pressurized water reactor technology adapted for subsurface deployment, using pressure from a mile-long water column atop and surrounding the reactor in the borehole, to support operating pressure and cooling. In this design, thermal energy is transferred through a closed-loop system from the reactor canister to a heat exchanger, then rises to the surface in a secondary closed-loop for conversion into electricity, like a geothermal system.

Following arrival at the Parsons site, the non-nuclear prototype reactor canister will be prepared for testing as Deep Fission continues preparation for its large diameter drilling program. The Company is advancing permitting with the Kansas Department of Health and Environment (KDHE) for the non-nuclear borehole, which is expected to serve as the next major proof-of-concept milestone.

"This milestone reflects disciplined execution across fabrication, testing, and delivery, and strengthens the foundation for scaled deployment of our Gravity Nuclear Reactor™ system," said Mike Brasel, Chief Operating Officer of Deep Fission.

The Company is also progressing development of its full-scale nuclear demonstration borehole and advancing design of its primary heat exchanger. These parallel efforts support a phased strategy to accelerate iterative validation of the most unique aspects of Deep Fission's commercial deployment model.

Deep Fission is participating in the U.S. Department of Energy's Reactor Pilot Program. Authorized under Executive Order 14301, the program enables reactor testing and deployment in order to accelerate the path to commercialization of nuclear energy.

Tune in to Deep Fission ringing the Nasdaq closing bell today at https://www.nasdaq.com/marketsite/bell-ringing-ceremony

About Deep Fission

Deep Fission is developing technology that places a small modular pressurized water reactor in a borehole approximately one mile underground. The Company's Gravity Nuclear Reactor™ approach combines established pressurized water reactor technology with a novel underground deployment model designed to simplify construction, enhance safety, and support scalable commercial deployment. Deep Fission is focused on delivering reliable, low-carbon baseload power to meet growing electricity demand from utilities, industrial customers, and data centers. The Company is currently advancing the development of its first reactor project in Parsons, Kansas and was selected for the U.S. Department of Energy's Reactor Pilot Program.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the federal securities laws. Forward-looking statements include, but are not limited to, statements regarding Deep Fission's business strategy, technology development plans, potential commercial deployments, potential demand represented by non-binding LOIs, expected regulatory activities, planned project milestones, potential commercialization, potential revenue recognition, and the timing, feasibility, scalability, safety, and performance of the Company's technology. These statements are based on current expectations and assumptions and are subject to risks and uncertainties that could cause actual results to differ materially from those expressed or implied.

Important factors that may cause actual results to differ materially include, among others, risks related to the Company's early stage of development; the non-binding nature of the LOIs; the Company's ability to negotiate and enter into definitive commercial agreements; technical, engineering, drilling, construction, regulatory, licensing, financing, supply chain, and deployment risks; the Company's ability to obtain required approvals from the NRC, DOE, and other governmental authorities; market adoption of the Company's technology; and the other risks described under "Risk Factors" and "Cautionary Note Regarding Forward-Looking Statements" in Deep Fission's filings with the Securities and Exchange Commission.

Forward-looking statements speak only as of the date of this press release. Deep Fission undertakes no obligation to update any forward-looking statements, except as required by law.

View source version on businesswire.com: https://www.businesswire.com/news/home/20260707721954/en/

Contacts

Media Contact
Chloe Frader
[email protected]

Investor Relations Contact
Bob Prag
[email protected]
(858) 794-9500

Elevate IR
(720) 330-2829

View original source (Business Wire)Deep Fission, Inc. on 6ix

Earlier from Deep Fission

Later from Deep Fission

All Deep Fission news releases