Danieli & C. Officine Meccaniche S.p.A.MIL: DAN

Profilco Contracts Danieli for 28-MN Extrusion Press

· Issued by Danieli & C. Officine Meccaniche S.p.A.

Summary by 6ix AI

Profilco Aluminum Systems S.A. has awarded Danieli a contract to supply a new 28-MN (28-meganewton, a measure of pressing force) aluminum extrusion press, to be installed at Profilco's plant near Athens, Greece.

Key details

  • Profilco already operates a Danieli Breda extrusion press commissioned in 2001, and Danieli says the new investment will support Profilco's ongoing capacity expansion and growth plans.
  • The new press will use Danieli Breda's ESED 5.0 Energy Saving Electrical Drive. Danieli says ESED 5.0 builds on the earlier ESED 4.0 with an advanced hydraulic power pack architecture and enhanced automation functions.
  • Danieli says ESED 5.0 gives an additional 5% cut in energy use, for total achievable energy savings of up to 30% compared with conventional extrusion equipment on the market.
  • The line will make a range of aluminum profiles, with a focus on architectural and industrial uses.

What’s still pending

  • Commissioning of the new extrusion line is scheduled for late 2027.

6ix AI wrote this summary from the release below and checked it against the release.

Profilco Aluminum Systems S.A. has awarded Danieli the contract to supply a new, 28-MN aluminum extrusion press, which will be installed at the company's plant near Athens, Greece.

The project marks another important milestone in the long-standing partnership between the two companies. Profilco already operates a Danieli Breda extrusion press commissioned in 2001, and the new investment will support its ongoing capacity expansion and strategic growth plans.

The new press will be equipped with Danieli Breda's latest Energy Saving Electrical Drive technology, ESED 5.0, designed to further reduce energy consumption while simultaneously improving press performance, reliability, and availability. The result will be higher productivity, enhanced product quality, and lower operating costs.

Building upon the proven success of the ESED 4.0 platform, the new ESED 5.0 introduces an advanced hydraulic power pack architecture and enhanced automation functions. These innovations deliver an additional 5% reduction in energy consumption, raising the total achievable energy savings up to 30% compared to conventional extrusion solutions available on the market.

Scheduled for commissioning in late 2027, the new extrusion line will produce a wide range of aluminum profiles, with a particular focus on architectural and industrial applications, enabling Profilco to further strengthen its position in both domestic and international markets.

Danieli & C. Officine Meccaniche S.p.A. on 6ix

Story so far

Earlier from Danieli & C. Officine Meccaniche

Later from Danieli & C. Officine Meccaniche

All Danieli & C. Officine Meccaniche news releases