Replay available

Xeros Technology Group (LSE:XSG) — Full Year Results for the year ended 31 December 2025

Full Year Results for the year ended 31 December 2025 hosted by Xeros Technology Group (LSE:XSG) on Investor Meet Company, held 2026-04-28.

Tue, April 28, 2026 at 6:00 AMendedReplay
Xeros Technology Group (LSE:XSG) — Full Year Results for the year ended 31 December 2025
Company
Xeros Technology Group PLC (LSE:XSG)
Date
Tue, Apr 28, 2026, 6:00 AM ET
Replay
Watch the replay on this page · 1 h 1 min
Results news release
Full Year Results 2025 · Tue, Apr 28, 2026

On 6ix: 6ix.com/event/xeros-technology-group-plc-xsg-full-year-results-for-the-year-ended-31-december-2025

Replay

Transcript

Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.

0:00 Good morning, and welcome to the XEROS TECHNOLOGY GROUP PLC investor presentation. Throughout today's recorded presentation, attendees will be in listen only mode. Questions are encouraged and could be submitted via the q and a tab situated on the right hand side of your screen. Before we begin, I'd just like to submit the following poll, which I kindly ask you to submit your responses to. I'd now like to hand over to CEO, Neil Austin. Neil, good morning.

0:24 Good morning, and good morning to everybody. Thank you very much for taking the time to to to listen to our update today. With me is my colleague, Alex Strstrom. Morning. Apologies on the behalf of our chairman, who usually attend them today, but, unfortunately, due to personal reasons, cannot attend. But we'll do our best to fill in for him in the interim. So as is usual with these cases, we will obviously talk a little bit about the specifics of of of last year, and we will cover the financials. But I think most people are interested in broadly the narrative related to the story and the progression related to that as well. So, what we'll do is we'll we'll hopefully skip through at some pace, albeit we'll just tend to to do a little bit to remind some of those that are newer to the story of some of the fundamentals related to to XEROS and and what we're all about. Okay. So very succinctly, what do we do?

1:19 We are firstly licensing business. We're licensing within sustainability. We are very firmly a green tech business. We have proprietary technology, proprietary IP, and and specifically, we operate within the laundry and the apparel industry. So that's the manufacturer of garments and then the cleaning of garments that that comes thereafter. What we offer up to those industries are, significant savings in terms of energy and water efficiencies, which result in in quite significant cost savings, and also the reducing reduction of pollutants. So whether that's chemicals that are used in that process or or indeed capturing them in the form of of microplastics, microfibers as well. That's who we are and what we do. Why do we exist? There are two very specific problems in our two target industries.

2:10 First is fast fashion, which we talked about on a number of occasions. Key stats there, a lot more clothes being purchased, not such high quality, and they end up in landfill. And the reason why is because people people find that they don't look nearly as good as when they first bought them. So there is a clear problem there in terms of the the maintenance of the the garment. And then the second piece is when we move into, laundry, which is related to that, is that the fundamentals of a washing machine haven't really changed in some fifty, sixty years. It's a large rotating drum with lots of water, heated up, and then some kind of agent. So a fabric detergent is is what we use nowadays. It's very good when it comes to cleaning garments. It's the most effective way we know how to do it. Fortunately, that cleaning process also abrades the garment, so you start to see a deterioration in it as well.

3:04 So we all know this. We have our favorite jumper, T shirt, pair of jeans, or whatever. It it breaks down through repeated washing processes. Okay. So what do we come up with in terms of solutions for that? These are videos, unfortunately. We don't have the mains field presented, but if you go on to our website, you'll see some of this in action, which I think really helps to to explain the technology. But the the first kind of solution is our XSGORD. So you you can kinda see it a little bit in the left hand side. These are small polymer beads which come into contact with fabric garments effectively, and what they do is massively increase the efficiencies of that process. So we reduce the water. We reduce the energy used to heat up that water, and because it's more effective, we reduce the chemicals, the fabric detergents, to be able to to to actually clean the garments as well.

3:55 And as I said, because it's a gentler process as well, it's much kinder to the garment as well, which means the garment will last an awful lot longer. So in a very kind of conservative, albeit it doesn't sound a claim, we can improve garment life by a 100%. I mean, some cases, 300% dependent upon what that garment is. The right hand side picture is effectively a still of an XTRON, which is effectively the application of that technology into a washing machine, domestic washing machine, commercial washing machine. And effectively, we contain the XSORDs within that. They are released during the cycle and then captured during the cycle using a kind of an Archimedes screw action through the lifters within the process. So it's a it's a technology that you can switch on or switch off depending upon whether you want to use it or not. It's it's very much hybrid in that in that in that way.

4:54 Second solution is filtration. So, again, apologies for those of you that know the story, for those that don't, it still shocks me when I say it that 35% of all of the microplastic pollution, microfiber pollution that we find in the world's oceans actually comes from cleaning clothes. So you might think it's, you know, broader, larger plastic waste, like plastic bottles, single use plastic bottles. It's it's it's not. It's actually through through the agitation of the garments through the washing process, which causes them to shed, And we get these micro, in some cases, nanoparticles as well, which are now being released without any kind of capture at all into the world's oceans, and it creates 500,000 tons of pollution every single year, really quite shocking.

5:42 The good news is that we've come up with a solution. This is not XEROS on its own saying that, but actually this is well recognized that the most effective way capture is actually by applying a filter to, washing machines. So on the left hand side, we've got a manifest on an external device. And on the right hand side, you can see a bit of an indication of it on an internal device, actually built into the machine. We have made a conscious decision to introduce the external device so that we can get a solution out to consumers without them having to wait for a new washing machine purchase. And it's a pretty significant opportunity, about a billion units of washing machines out in the world today and about another 100,000,000 being produced every single year.

6:33 Our technology is market leading. So we've got a 98% capture rate, which is pretty phenomenal. So it's 98% of all of that pollution is being captured by our rotating filter. It works with any domestic washing machine, and it doesn't have any replacement parts. So you don't need to replace the cartridge. So long as you maintain it and look after it, it will last long within your washing machine. So, genuinely high quality solution for what's a significant problem. The other key point that we always talk about when we talk about, particularly microplastic pollution is legislation. So it has been on the books. In some cases, it's literally it's there in the case of France, albeit it's now waiting for a standard to work towards. And, actually, XEROS are are proud and privileged to have been one of the companies selected to help create what that standard is going to be. So under the guise of the IEC, we believe that those recommendations will be passed on to the European Commission, and we think 2030 is when it's likely that that legislation will come into effect, certainly within the European Union, but also it's highly relevant for a number of states. And indeed, there's even a federal initiative in The USA and the likes of Australia as well. So it's 2030 for machines being produced, which, you know, if you do a little bit of backward working means that really by 2028, we would expect, people to be coming out with with partnerships on that. So there's there's the problems, and there's the two bits of key

8:03 technology that we that we have to to be able to answer those.

8:08 Just to talk briefly about the industries that we're working towards, so you can see kind of line drawings to represent the three key techno three key industries. The first is domestic laundry, which you'll all have heard of. As I said, that's that's about a 100,000,000 per unit per annum industry. It's, pretty significant in and of its own right, about $63,000,000,000. Interesting about that particular industry is that whilst there's hundreds and thousands of different brands, actually, they're all consolidated into 10 brand groups, which means actually to be able to get access into it is difficult in the first instance. But once you're in, you've only really got 10 key players that you need to talk to. The bigger brother of domestic laundry is commercial laundry, so it's the same idea.

8:53 Washing machine, but on a bigger scale. This is for the likes of, hospitality, leisure, health care, and so on. A slightly smaller industry, but actually a bigger ticket size. So obviously, the average cost and indeed the average royalty for XEROS is higher as a result on commercial laundry machines. And it also introduces a kind of razor razor blade model because the XEROS that we use in those machines need to be replaced out. So we have an ongoing revenue stream. Finally, if we move to garment manufacture, so most people don't realize that every single garment before it is packed and sent out to shops always goes through a final wash process. In some cases, such as denim, there's actually a process to affect the garment as well to get that kind of tinted look that we like. And we're able to access that as well by and improve that particular industry by adding our XORS.

9:44 Slightly smaller again in terms of market size, but equally, again, a larger ticket opportunity for for for XEROS, both in terms of the royalty per machine and also the the ongoing XOR supply as well. Okay. So that's kind of us in a nutshell ish. Ten minutes. That's pretty good going in terms of, what the technology is all about. I think to talk more specifically about what we've done through 2025, which is obviously the key thing we wanna talk about. So the first thing we talk about domestic laundry and the introduction of XORBs within that, we we achieved a pretty significant milestone last year. So we have signed up what's been termed a product launch agreement, so literally an intent to launch this technology with one of those top 10 that I talked about before. A business based in North America, and they primarily operates within The Americas. Pretty significant.

10:40 They do about 7,000,000 units of that 100,000,000 units per annum themselves and have big plans to be able to grow beyond that, and they see the XEROS technology as an enabler to do that.

10:53 Key point I just want to highlight here is that as well as being a technology provider, we also have ambitions to be able to create a broader awareness of the XEROS brand. And actually, in service to that, this product launch agreement has specified within it that the XEROS certification mark, which is effectively a stamp of approval from XEROS to say that this uses XEROS technology in the right way, will also feature on that machine. So so so where are we? We signed that agreement probably about six, seven months ago. Within the first kind of iteration, we've been focusing very much with the partner on actually the marketing side of the story. So some really kind of very compelling early consumer feedback. So this was kind of online with a a larger scale. So this was hundreds of people and shown the XEROS proposition using the assets that that that we have created so they could understand what the technology does when it operates and and the benefits that they'll get from it as well. A very, very high propensity to purchase came out of that, that has helped us accelerate on to a second stage of that, which is about getting actually machines in the hands of consumers, albeit prototype machines, which is on track for execution within the next kind of couple of months. That will really form out that marketing story, which is fundamental so that that business can understand how it can maximize the benefit of our technology.

12:24 So that's very much going according to plan. We don't talk specifics in terms of the financials on it, but what we can point you towards is the our list price, if you like, to get access to the to this technology. So a combination of the royalty and the supply of the XORs is somewhere in the region of about $25 per unit. So you can do the sums yourself about the potential opportunity. The other piece to mention when we talk about this is that whilst we're obviously delighted to have signed up the first partner on the product launch agreement, We've also got live active processes under NDA and certain cases actually being paid for, what we call a tech verification process with three more of those top 10.

13:09 The focus, the goal very much for the business has been about finding lead partners for each of the key geographies. Although they are global and they have the ability to be able to sell across the world, actually, the nature of the the regionalization of the business means that there are generally some of those top 10 that are stronger in certain areas. So there are really stronger companies in Europe, stronger companies in in APAC as well.

13:34 And we have very much had that in mind when we have been selecting who we want to work with. So our anticipation very much, which we'll talk about later, is that we'll be able to move towards further product launch agreements within this calendar year. Okay. Alex, you want give us a bit of headline on GARMENT and Q3? Yes. So thanks, Neil. So we've been working with our partner, Yermatt Lakina, based in Turkey for a number of years now to get the XORP technology in the hands of their customers for the processing of denim. And so that's the final wash that takes denim from the the raw denim that comes off the mills to the kind of stonewashed finishes that that that that you see in the shops and and the consumers are are familiar with. Took a really big milestone with that last year, which was getting the technology in a sort of live fire production environment with Ambition Apparel for the first time. So that's a really significant step. This is a technology where we have known the benefits at sort of lab and test scale for a for a long, long time. Those benefits are, you know, significant carbon savings, significant cost savings, less water, less energy, less chemistry, and and, crucially, for the industry, the complete removal of pumice stone, which is which is a sort of a key thing that that that and their customers are looking to achieve. So we can do all of that. We've been able to do it at lab scale for ages.

14:49 We can now show show people that this works at production level scale, with with, with Ambitious and Parallel Partners in Pakistan. So that that's great. That's a really good first step. But what do we need to do from here? So the plan, we've been working with the team, pretty closely the first half of this year to make sure that we've got machines in the key denim hubs all around the world that that can that connect us case studies really to prove out to prove the technology to those to those partners at the at the right scale in the right geographies so that we can expand the launch beyond that. So those placements have been agreed. Some of them have been manufactured. Some of them are on the way there now. They will be placed to to kind of prove out the technology in those hubs and and to act as the case studies to get get get a broader launch in the second half of the year.

15:34 One of the key things that that that Yarmak are working on at the moment is the is the the showcase of the technology. The biggest trade show, really, ITM in Istanbul, that's coming a few weeks time in June so that the the technology will be front center on their stand there ready to be deployed all around the world after that. So just a reminder of the economics of this. You know, this is these are really, really big bits of kit. But across the lifetime of a Garmin finishing machine, we might look to get about $50,000

15:58 from from the customers for that over the lifetime of the machine. Some of that's up front as a royalty payment. Some of that comes as the rate the XOR to sold on a repeated basis throughout the lifetime of the machine. So because this is a dirty business. They do need to come back to us and get cleaned and replenished. We charge for that, and that means that we can, we can, you know, have an ongoing revenue stream from denim as as they go. So really exciting progress to have this live and in production. Really excited to make our first sales, and we expect to make, make it make a few more of those this year as the technology starts to roll out properly. So that's that's kind of the yield max side of things. How can we help? So we have a relationship with a number of retail brands. We have been kind of showcasing our technology to to anyone who listen, and most retail brands will for a number of years now. The key steps that we've gotta take to get it into a live production environment. Now we've we've we've overcome that hurdle with ambition apparel and the other machines that are going out there now, which means we can push forward with our plans on those those partnerships over the next few months. So so that's that's that's one of our our key milestones we we hope to hit this year is that that co branded launch of launch of Denim with a with a real leader in the sustainability and retail space on Denim, and we're excited about the work that we plan to do with those guys. So we look forward to talking about them more more about that in due course. Very good. Thank you, Alex.

17:12 And then the the the final area that we talked about, obviously, is the microplastic filtration. So as I said, we made a very conscious decision that we wanted to be able to get the technology out into market, and there's a couple of reasons behind that. One was, in a very basic sense, it helps us to start to generate some cash, which is which is obviously important to the business and indeed to our investor base. I think the second piece is that we are very, very confident in the performance of the technology as well, and we wanted to be able to prove that. So by actually having a unit which is accessible really for everybody, we're gonna be able to demonstrate that we have that preeminence that we've talked about, you know, and we have it. We know because we've done significant lifetime testing on the device ourselves. We've given it to third parties such as the Hohenstein Institute, which has given us that that kind of certification of of 98% capture rate.

18:09 And then the final piece as well as what I talked briefly about legislation, it's interesting actually when somebody like me that you actually read the transcript of senate hearings and so on in California. Sometimes a a lot of the kind of debate is about is there a practical solution out there? Nobody kinda no. Nobody debates. Nobody really disagrees with the logic of the fact that this is being generated by the laundering process. So the easiest, most cost effective way is to intercept to outsource effectively.

18:41 But there has then obviously been a question about fine, but actually what is the technology already out there which proves it. Now there are a couple of players out there already, which we're we're obviously pleased to see. Not to be dismissive, but we think they haven't quite managed to crack it in terms of actually finding something which works for consumers in terms of your usability, that works in terms affordability, and also, as I've said before, actually lasts the lifetime of the machine as well. And it's why we feel fundamentally that if we put our technology out there, we will be able to directly answer some of those legislatures' queries about the viability of solutions to be able to to legislate towards that as well. So long story short, this is why we took the decision to partner up with old friends of of mine from my from my previous previous life beyond XEROS, which is working with Domains and Baba, the world's largest small domestic appliance manufacturer, a colossal business.

19:39 They are preeminent in terms of the quality of their manufacture and also their reach. So we we partnered with them. We announced that a couple of years ago, and I and really now, we're starting to see that come to fruition. Last year, we announced that Russell Hobbs, so keen to kind of move forward with this, wanted to give us that pre commitment, and they will launch this year. And earlier this year, we announced that MediaMarkt, Europe's largest consumer electronics retailer, equally have acted with intent as well to say that they wanted to be able to to to be one of the first people to to bring this to market. But this is by no means all that we have in the often, indeed, in some of the conversations I've had

20:25 in the last day or so. The biggest challenge, which is a great challenge for us to have, is actually the the channel management piece. So making sure that all of the people, whether that's retailers, broader consumer electronics brands, or actually washing machine brands, we can manage their want and their need to be able to have a certain a certain area that they can they can launch without initial competition. So it's it's a good problem for us to have, but it also, I think, very clearly reflects the fact that there is a there is a want, there is a need, there is a demand for this product, which we we knew anyway in terms of the consumer insights that we were able to do upon this. Yeah. The the one thing I'll just add on that is, you know, we there is a steady drumbeat of news and, you know, and stories the whole time that are that are just backing up the story on microplastics and why we need to do something about it. You know, the the the the latest iteration of that was a was a big documentary on Netflix, you know, focused on the on the health risk, particularly about fertility. But, you know, it is more and more of that that kind of buildup of that of consumer awareness, but also the the the evidence base, which means we we know that that that's something that to be done. There is something to be done about microplastics, and we know it's coming.

21:34 Yeah. So so to give some headlines in terms of some of the fundamentals. So we make anywhere between 3 to $8 per unit. It's a royalty. It flows straight down to the bottom line, which is great. We are, as we all say, an IP rich asset light business, so we've done all of the hard work now. Now, hopefully, we can sit back and start to see the benefits of it. We have very strong patent

21:55 coverage on it as well, which we we we very much mentioned before. So the the plan is we'll talk about in due course is to to give the likes across the media market and a couple more that we will we will name in the forthcoming months, the ability to be able to push this piece out this year. It will generate income for us, which is great, but it'll also start to generate a kind of foundation for ongoing income globally because we do believe that in fact, we know that there is a want to meet this product not just in Europe, but in The Americas and indeed in Southeast Asia, and that will come in due course. This is just very much the beginning of what we're going to see in microplastic filtration.

22:32 Okay. So to kind of talk a little bit more and elaborate on alright. Well, what are we expecting in in in the next period? I mean, I think, Mike said, it's a little it's a little bit of a kind of a get out of jail free for us by talking about a longer period of 2026 to '27, but we think it's important that we wanna manage people's expectations. We are a b to b business. We're a licensing business, but we're also trying to break novel and innovative technology. So it is technology which clearly answers consumer needs or indeed industry needs as well, but it always takes a little bit longer than than than than people want or indeed that we would want as well. But kind of in a nutshell, what do we expect to see happen? So on the domestic laundry, particularly the XORB technology that we're going to use in there on our care technology, as we call it, clearly, we're expecting further developments with our North American partnership. So that product launch agreement has milestones within it. We are working our way through those milestones, and we're anticipating that within this next period that we're very much going to move towards being able to be a bit more specific about when that product will actually launch and what that launch looks like now. Clearly, there's huge opportunity even with just with our partner because they, as we said, sell several million units every single year. And they very much see that the opportunity for this is not just as a niche sale. Probably, they will start at a more premium level because that's the the

24:02 way the all new technology gets broken. But they see very much because there's cost savings for this in terms of the lifetime ownership of the machine that this can cascade all the way through the the product lineup as well. So we're expecting to be able to make further progression on that and and make great announcements for the market as well. But beyond that, I talked before about the fact that we are in serious negotiations with others as well. We firmly expect to be able to, unveil a bit more specificity about that in due course as well. It's always good to have a couple of options to be able to work towards, which is why we've we've actively pursued a number of different different leads. So we fully expect that we're gonna be able to make some further announcements on that as well. But the bigger picture on this, the goal, is that we do very much believe that this should and has the ability to become a default technology within the industry.

24:56 As I said, there are 10 big players within this space. We have conversations at a at a basic level with all of them. We have we've mentioned that before that we're in kind of a process with, but we're also in early stage conversations with others as well. So this tech verification process, as we call it, which is to effectively provide, the ability for those other big brands to be able to properly understand what does the technology actually do and does it work on my machine and how how can I kinda sell it and so on? We're we're having those conversations and I I do expect actually that we're gonna be able to to put more in that sales pipeline in the in the forthcoming period as well. As I said, the goal is that within a achievable period, we wanna see this technology being offered by every single washing machine brand in the world and I believe that's possible.

25:51 Just in terms of the finish, Alex, you just wanna develop on how we're gonna build upon the foundations that we've got. Yeah. I think the thing to to think just to to kind of point out with finish is that this is a technology that is live and for sale. So we're we're in a slightly different position than we are on the on the domestic technology and that we've got a machine in the market. We've got a partner that's building and selling and and and the the the kind of the key for us is to execute on the sales strategy with that that now. We are supporting Neon Mac as as best we can to to maximize that rollout. We're supporting them with the re with the with the outreach to the retail brands. We're sort of helping them out with kinda testing and and understanding the technology in a bit more depth, And we're we're kinda helping them out with iterative tweaks we could make to make the technology's benefits even more compelling. So that's our that's our that's our ambition for the for the next sort of twelve to twenty four months, as we mentioned earlier on, is to to to maximize that rollout and and to get it get it Yeah. Get it as as embedded within the industry as we can. And we can do that by supporting, and we could also do that with the brand pool that we're working on. And and like I said, hope to be able to share some some moves on a June call. Yeah.

26:54 I mean, I'll I'm gonna talk about it on filtration as well. I'd say kinda thematically, last year was about making kind of agreements, which really position the business very well in terms of having big players, big global, very well established high quality partnerships in place. I think through this year, you're gonna start to see more and more brands names that you will have heard of that we're gonna be able to say are are either actively working with XEROS in terms of commercialization of our technology or or very much wanting

27:25 to kind of raise their hand and say this is the technology that we feel the world needs. So I I think that that is the theme that you'll be able to see. I think specific on filtration, I mean, it's a bit more granularity. The key European markets you catch on your front, it's the Iberia, indeed, the likes of Benelux and Nordics as well. We we will see full launch of the technology as Alex has mentioned in a couple of occasions already today. It's pretty exciting for us because although we've had sort of commercial laundry machines out there, will be the first time that we as human beings, as consumers, will be able to point towards a store, point towards a website and say that's my product. That's my product, which is actually for sale, and it's gonna be available for people to be able to start to use.

28:13 But as I said earlier in the presentation as well, we know that there is pull in terms of North America, particularly Japan, South Korea, and Southeast Asia as well. So, again, we are working with we're trying to qualify who is the best kind of placed distributor to be able to help us maximize that because we don't want somebody to just take the technology for the sake of it. We want somebody that's gonna properly get behind it and really really give it the best possible chance to be able to get to consumers' hands within those those regions as well. And then the final bit as well, I've mentioned that we are

28:48 anticipating, could be within a couple of months, an agreement with one of the world's largest washing machine brand groups as well, which I think again is great for us in terms of, obviously, an opportunity to be able to commercialize, which is the validation that's gonna be able to come from that is significant. I think when we're able to name that company, you'll be able to see the quite significant scale that they've got. And, you know, it doesn't put it doesn't take a genius to be able to put two and two together on this and say, well, if they're wanting to partner with us on a freestanding device, and we know legislation is coming for what's probably gonna be an integrated device as well, it it positions us extremely well in terms of being, if not the default provider, but very much the preferred provider of that technology for some of the biggest players within this industry. So just to remind the quantum of that, a 100,000,000 units sold globally, even if it's just Europe, it's about 30,000,000 units every year. I mean, is a massive opportunity for XEROS, and we believe it's very much achievable within the next couple of years.

29:58 I think that the final bit, you kind of you might not see it. We could have highlighted it a little bit more. We mentioned it in terms of the RNS as well that we released today.

30:09 When we closed off our funding round last year, it was very successful indeed. In terms of the price, we very pleased to be able to get it effectively, not not not even really at a discount versus the the the the the kind of average for the, I think, two two to three months prior to that. But also the quantum that we were able to raise as well was was was more than we had set out to do. That has provided the business with an opportunity, if if you like, to kinda take a step back and and consider what's the best thing to be able to do with that.

30:44 We've taken some time over the last three, four months. We have strategized, and we've really kind of considered what's the best possible use for that additional cash that we didn't expect to be able to have. And we've made a considered and cautious decision that we want to invest some of that here and now. And that investment is coming very much in the form of upskilling some of the key people within the business here, both from a technical perspective and actually from a commercial perspective as well because these things do very much go hand in hand. It's a commercial technical conversation particularly as we are getting to the point of working with these really big partners. And we've also made a conscious decision to be able to start to think and put some pieces in place, particularly on the domestic laundry care application to be able to to kind of improve that to a certain degree. Now this is not a r and d project that's started.

31:42 It's gonna take five to ten years. This is a fine tuning of the technology that we already have in hand, and it's also finding ways to make it to find multiple ways for partners to be able to work with us as well. So it's offering more flexibility

31:57 so that we can more quickly get to that point that I talked about before, which is providing this as a default to pretty much every single washing machine brand, every single washing machine group that's that's out there. As I said, I wanna repeat the words very cautiously and very considered. We are starting that process. We still very much have that, additional amount on the balance sheet, but we're making a a message. We're sending the signals that I just said that it is our intention to be able to take some of that so that we can accelerate and bring forward some of those opportunities that we've had in hand for the last twelve months. Yeah. Think I'd just add to that. You know, we see this as an iterative process. So this is this is we can be that that investment and the progress that we're gonna make can go hand in hand with the commercial progress that we make and the conversations that we're having with the customers. So it isn't there isn't it isn't stand alone. It works with the commercial progress we anticipate making, and it's and it's something that we, you know, I I, in particular, keep a very close eye on, and this is going to be, you know, an iterative process that we can we can manage throughout the throughout the the kind of the coming coming months and years. The the the reasons we're doing it is is it's it's a couple of reasons, as Neil's already mentioned, is to accelerate and make sure we can can bring this technology to the market the most effective way. It's to to buttress and expand the revenue portfolio that we already have in place. So I think it's it's it's an exciting step we're gonna make to try and try and really get this technology into the hands of the users, which is where it needs to be for, know, you for

33:27 many reasons, you know, ecological consumer ones, but also so that we can start seeing the the revenue come through that this business has worked so hard to get to. Yeah. Okay. So from a financial summary point of view, I won't go into too much depth on this one. You know, the the the indicators that potentially is moving in the right direction this year. We're, you know, we're happy with the progress that we've made. Last year's revenue was not about, you know, shouting from the rooftops that we've got a got a 50% increase in our revenue last year. What it's about is working with our partners to put the put the foundations and the building blocks in place for the more significant jump we expect to see across 2026. And we as we run you through, we we think we're really, really that we've got those building blocks in place that are gonna allow us to to to make that step change in 2026.

34:15 We have had a tight control of cost the last couple of years, and you can you can see that in the numbers when it comes through for 2025. When we talk about the investment that we just have, we're not we're not undoing that good work. It is, something that we we keep, you know, a a a and frequent eye on, and the investment is gonna be targeted in the right places. That mean we can, you know, we can make them maximize the resources that we have available to us. From a cash at March point of view, the first quarter of the year is always our most expensive. That is not an indicative run rate Yeah. For the year. I I want to highlight that. You know, we are comfortable with the cash we've got, and we're comfortable that we we have the resources to to maximize the opportunities that that are significant, that are that are coming towards us over the next twelve to eighteen months.

35:01 The the the only thing I think I'd add to what Alex has said is that I don't I'm I'm not disregarding any of the financial performance that we achieved last year or indeed this year. For for for me, this is very much about us creating the foundations now today within the next kind of twelve, eighteen months to really give us the opportunity to be able to to rock out and to accelerate through. Whether it's on on the finished technology, whether it's on the filtration technology or the care technology, It's not really about generating a million pounds here, million pounds there. This has significant potential to generate tens tens of millions of of of profit for this business. And, you know, as Alex has already pointed out, we are a a pretty lean business as things stand. So because we don't need to invest in manufacturing, we don't need to invest in, you know, multiple additional people.

35:59 And when we reach that pivot point, which is what we're focusing on right now, that's when we see the significant return that I think everybody is expecting. And to be blunt, that's why that's why I'm here as well. So, yes, the financials are important to give everybody a level of confidence in terms of what we're doing. It's about those foundations, and it's about being able to to to demonstrate that they are real. Okay. I mean, just kind of in conclusion, this is a slide that we have used a couple of times before, but I would just remind everybody of the fundamentals of the investment case for this business. We've talked about being market ready and commercial agreements in place. That's never true than it is today. We will see the finished technology, as Alex has said, is there. It's in garment manufacturing facilities as we speak right now and is on its way to further in Egypt, Bangladesh and indeed Turkey.

36:58 We have agreements in place with some of the biggest players, and we've consciously taken the time to make sure that we can get those the right place people, the right place businesses to enable us to be able to to really pivot out to that. And the technology that we're offering as well is offering solutions to issues that are light. They are real. This this is not a niche problem that we're going after, whether it's water scarcity, energy scarcity, microplastic pollution, this is something that everybody knows about. So we are pushing very much against an open door in terms of finding people that are interested in in the solutions that we provide. We've demonstrated it in terms of third party verifications, but we are generally market leading. We're market leading on the XOR technology and on the microplastics technology, built by people that have spent, in some cases, nearly twenty years of their lives creating it. So it really is market leading for for for I've talked about the business model. We are lean. It is highly profitable when we reach that pivot point, which we believe we can do.

38:05 And the final bit is we've got great protection. You know, we are very well covered when it comes to IP, litigation insurance, so so on and so forth. We know this thing's gonna take off, and when it does, people will try and nibble around the edges. We're very, we're ready and prepared to be able to to face that off should that should that happen. Okay. I mean, the hereafter, Alex has got a load of different financial models as well, which you can which you can, see in due course. But I think in terms of the core piece of the presentation, that's what's kinda concluded. Perfect. Thank you both for your presentation this morning. Ladies and gentlemen, please do continue to submit your questions via the q and a tab on the right hand side of your screen. For your reference, a a recording of today's presentation will be available on the investor meet company platform shortly after the meeting's ended.

38:55 But for now, guys, as you can see, there are a number of questions which have been submitted. Can I please ask you to read out the questions and give your responses where I question? A I that's I think So it's that's asking for a bit more specificity on the twelve to eighteen month schedule, which we've talked about before. So what's the next milestone? When does it trigger? And is that related to early payments as well. So I think I talked a little bit about where we are with that particular agreement. So just to reconfirm some of the fundamentals of that agreement has those milestones. That's quite right. Those milestones go from the theory of doing something together right the way to the very end, which is literally a product with the XEROS technology coming off a production line. There are trying to come off the top of my head, in this particular, I think there's seven slash eight key milestones.

40:03 And the first milestones that we talked about are very much focused on the marketing side of it. So I think quite rightly, this particular business has a has a sufficiently high level of confidence in the technical feasibility of the of the techno of the technology that actually they wanted to focus more on, okay, but how am I going to sell it? So which of the features and benefits resonates most with the consumers? What are gonna be the key kind of incrementals in terms of price points? Is there a a regionalization piece? Because primarily we are talking about North America which is yes, technically, if it's just The USA one country, there's massive kind of regionalization between West Coast, East Coast and Middle And South and so And we are very much on track with what was agreed last year. So as Alex has always pointed out, there are payments related to that.

41:02 This first stage that we talked about does have payments related to it. That that that would be right, and we're expecting that to to to come through in in due course. So I think if broadly, the question is about will we get some money? Are we gonna start to see some money back from that agreement? The answer is yes. Do we expect to see some more within the year? The answer is is is another yes. Are we trending in the right way or progressing in the right way with that? The answer is absolutely a 100% yes as well. Second question, if I had a penny, but I think it's fair is whether we anticipate another fundraise before we break even. I I think we've we've just talked a little bit through the presentation about the fact that we had a, to be honest, more successful fundraise than we thought that we had intended to be able to to go out with. So the the business is very well funded at this moment in time. Speaking on behalf of the board more generally, we're very happy with the level of funding that we've got.

42:00 We overlay that with a very tight and stringent approach we've taken to cost, which has been a feature of of Alex and I at the helm for the last couple of years. I think gives us further confidence related to that, Plus the other very important bit, which is obviously the big part of the bigger picture is whether it's on those partners we talked about, maybe across the hubs and filtration, whether it's the installations that Yilmak are now achieving with the denim technology or indeed the North American and indeed others on the care technology as well. All of these are opportunities to be able to generate revenue in a way that we haven't been able to do before. So we combine all of that together, and I would say we are on a very not comfortable is the right word, but we're in a good position. We're very well placed to be able to accelerate through in terms of what we want to be able to do. So, yeah, I I think that probably best characterizes position in the business. I don't know if you wanna add. Yeah. I I think I think Neil's Neil's got it right there. I think what we, you know, we need to see a step change in revenue.

43:04 That's what this business is here to do. Right? We are here to start generating some some returns on on on the funds that shelves over the years, and we're here to to get our technology in the hands of consumers and users to generate revenue. We expect that to happen across '26, '27 and beyond at at a, you know, at a much, much more meaningful way than we've ever seen it before, and that gives me the confidence that we are, in a really strong position when it comes to cash. Okay. We've got a very specific question related to the XORBs and whether they present a choking risk. So this is you'll not be surprised to to notice something that very early on in the process, there was an awful lot of research done on. I think the first thing to point out is that although they are made of of plastic effectively from from PP or or nylon, they're not actually toxic or chemical, chemically enhanced to a degree that they are, in any way a danger to to people.

44:00 There's a slightly amusing anecdote we have at one particular trade show, an individual mistook them for mints as in m I n t s and started eating them. And we can report that they suffered no other effects. So firstly, they're not toxic in any way. The specific size has obviously been generated with a consideration of efficacy in terms of how they can benefit, but also in terms of a choke hazard as well. So we're very touchwood, take it too too lightly, but, you we're confident that they are in their way hazardous or or choking hazard. But it's a fair question because clearly, when this gets into the hands of individuals, we want to take the due diligence and have done to make sure that there is no harm, no potential harm to anybody as well.

44:54 Next question, I guess, is kind of related to an earlier question, which is the specific conditions. What specific conditions must be met for the large OEM partner to move from testing to full scale rollout? He controls the timeline, Us us or them. And so, again, I'm gonna presume this is the North American domestic laundry partner. So, I mean, the specific conditions are I could probably sit here and talk about them for an hour. They they are market sensitive, so I I can't I can't get too specific about it. But what I can say is more broadly, they are milestones related to, as I said, the kind of marketing side of it, which from from us is quite straightforward. We've had to provide some prototype machines.

45:40 It's it's very much done to to the partner to then do the next steps on that, albeit we will collaborate with them on that. From a technical technical perspective, there are clear goals that we have agreed that we want to be able to reach, which is in terms of in fine tuning of the hardware, and hardware I'm talking about is the XTRON. So these are the lifters that go over the the the this is the harvesting soft construction that goes over the lifters within the machine. It's also the containment area at the back of the drum. To a certain degree, it might be specification of the egg source, albeit it's unlikely. There's also an awful lot of cycle development that goes with that as well. So this is obviously making sure that we get a really high level of wash performance whilst also a a good level of kind of fabric fabric care benefit as well. So all of those have got specific goals related to them. They do unlock further payments as well to to kind of preempt any question related to that.

46:44 The piece about who has control, mean, I have had experiences from previous companies about these kind of development agreements. The reality is it's it is it's called a joint development agreement in most instances for a reason. So it's for both parties to be able to do it. Clearly, we can't compel somebody to to bring a product to market. Equally, they can't compel us at the same time as well. So what what I can say, hopefully, to give people a level of confidence with this is we we made two conscious decisions. The first one was, deciding to partner with the North American business. We were very much satisfied that they had a very serious intent. They had a very clear idea of how they would use the technology as well in terms of commercialization.

47:31 So are they serious about working with us on it? The answer would seem to be very much yes. However, clearly putting all our eggs in one basket is not necessarily the the right way to go about it, and that's why I refer back to the the conscious decision to embark upon developments with others as well. So it's not just North American guys. We've got, two European, and as I can probably say now two in Southeast Asia as well, one that we we we've referenced before. And this is because we need to be able to offset any risk that we've got. And that might be because, who knows, they might really like the technology, but for whatever it might, you know, socioeconomic reasons relative to their key launch markets, geopolitical issues. We do live in turbulent times, unfortunately.

48:19 All these can affect. It's got nothing to do maybe with our development program, but maybe things relative to that business as well. So it is b to b. We never have full control over this process without getting into too many specifics. That's part of the reason why we've made a conscious decision to invest in certain areas as well so that we have multiple ways that we can partner up or we can work with these with these groups as well. So that if there are reasons why they can't progress and the way that we want them to or the the pace that we want them to, we've got we've got further solutions to be able to provide relative to that as well. So we got answers. Next question is given the capital light model, how dependent are you on partner execution?

49:06 I think it's what control do you retain if a partner delays? I think I've answered a a a big part of that. I think maybe what I can talk about, which gives a little bit more of a sense of the the partnership relative to it as well as I've I've talked in the last few hours about the importance of the product certification mark that we bring. So the product certification mark is not just us trying to get our brand on it for the sake of of of it. That there there will be an authentic benefit to being able to have that for the part the partner brand as well. Some of those benefits will come in terms of we provide highly accurate terminology, highly accurate, illustrations both in terms of static visuals and a deep video so that they can properly explain how the technology works. That's really very important to date because firstly, they might get it wrong. We left it in their hands, but also because, you know, the reality is we've spent years working to get this technology to a certain point. We we feel it's important that we have a level of ownership beyond that, and also we feel as though we should get a certain level of of of awareness relative to that as well.

50:16 So, I mean, if the piece is relative to the the level of control that we've got, we've got we've got control in terms of the messaging and the marketing that goes related to that as well. That's why we that's why we've insisted in product certification mark, which is on the agreement we've got with the North American partners. It is in the agreements we've got with Russell Hubs and with MediaMarkt on the filtration piece as well. And also, as Alex talked about before, we have one, garment retail brand, which is very, very keen to get their hands on the denim, technology as well. They don't just want to use it on their production of the denim. They also want to be able to do a PR campaign. They want to be able to celebrate the fact that they're using XEROS technology and all of the benefits that go with that as well because it will be it is the greenest way to be able to produce a pair of jeans in the world as well. So, you know, we we hold our own, I think, is what we can say. And, actually, I think the manifests, some of the elements of that agreement with the North American partner shows that. We do not we do not get pushed around.

51:20 We never have full control upon this piece, but then the only way that we could do that would be if we fundamentally change the commercial approach for the business, and then we would be a lot more expensive to be able to fund, which I think is not the right thing to do. And I I don't think fundamentally that's what that's what shareholders would want us to do either. Okay. If we move on to the next one. So have any water companies shown any interest in supporting your work? I mean, it's an interesting one. We have had conversations with people more broadly within the water space. I think you you you you could term it. There is always the question we get asked, is when it comes to microfiber filtration, would it not make more sense to do that at, you know, serious treatment plants and so on?

52:14 I mean, you you could do, and and there is some level of filtration that works there as well, sometimes even down to kind of nine nanoparticles. It's hugely expensive. It's hugely expensive in terms of the implementation of it and it's also extraordinarily lengthy as well. So we we maintain a dialogue with some of the key players within The UK. But actually, if it comes down to microplastic filtration, the the the community, if you like, at large legislators at large, NGOs that work within the space, everybody is in agreement. It it it really needs to be a point of production of that pollution, which which is the washing machines themselves. Next one is you want to pick that next one up, Alex? Yes. So I mean, we've there's a question again about existing cash on the balance sheet and getting through to breakeven. Think we covered a little bit earlier on why we're confident that we're in a really strong position at the moment. So yeah, I think think we think we're comfortable having answered that one.

53:19 There are two questions at the moment about the installation of our microplastic filter and how straightforward it is. I can take that one having having plumbed that one in plumbed one in myself that our engineering team, when they were looking for to check how foolproof their installation guides were and to test it in a real world environment. Came to the finance team as as as perhaps indicative of less than least seven people within the within the business. You know, my my team, all managed it. No problem. I took one home, plumbed it in a home. No problem at all. It is no more complicated than two Jubilee clips. And, yeah, and and it and it worked very well. So, yeah, very happy with how straightforward that is. It it may be something that some people will get installed alongside a washing machine when they if they have someone to come in and do that.

54:07 That that, in many ways, is one of the selling points for our customers because they then have an extra point to to sell in, a new product with additional margin the way they haven't done before. You know? When your washing machine installation, company turns up, they will have some on the back of the van, and they will say, oh, while I'm here, would you like to buy a washing machine filter? Because one set, and it's another selling point. It's one of the reasons they like it. So Yeah. I would I would really highlight what Alex is saying. I mean, for for firstly, keep on is it it is very easy to do. But but, yeah, Alex is right. I mean, there are multiple points at which so the the retailers or the the brands very much like this technology because they see it as attachment sale, as Alex is alluding to. Part of the reason why it's so interesting to them is because, actually, although the ticket price is pretty high in washing machines, much higher in Europe and The US than it is in The UK, actually, the marginality is not great. So they're constantly trying to look for ways to be able to improve, if you like, the overall margin that they make in a machine. The only real way that brands in particular or indeed the likes of a a Curry's can do so is by the selling of warranty.

55:16 So it's very much a ongoing revenue stream for those guys. But that attachment rate is is is not there. I mean, if you look about something like computing or photography as it was back in the day, you know, the attachment rate you can get in some cases, like 56% on the sale of the core, whether it's a camera or a laptop or whatever. On appliances, there's there's definitely a huge opportunity for them to be able to do that. Something that I I would have worked on is myself personally, while I was at the Whirlpool Corporation. I mean, there are multiple ways that they can influence the opportunities, whether it's point of sale of the sale of the machine, whether it's then a point of purchase, maybe it's at a till, or indeed if it's an online journey as well. It can be a other people bought this as well. Whether it could be a bundle, which is you get money off if you buy the two together or the final bit as well, which Alex said, which is, I think, what a lot of these guys see is that when the machine is being installed, you've gone to the cost of of having an engineer install that. It's the it's a very easy thing to be able to then also, if you like, give them the opportunity to be able to buy the microfiber filtration as well. You know, actually an engineer is a is a a figure of real authority to the consumer within their home, not just in terms of the the technical elements of of the washing machine, but actually how how it works and what's good and what's bad.

56:36 And so, you know, them fully kind of armed with the specifics, the the features and benefits, the bent up of the technology. There there's a sense very much from our partners that they they could be very effective in terms of imparting that to the consumer. So there is there is a a real opportunity for the experts, if you like, to be able to to help with the feasibility element of installing it, but also in terms of just broader awareness piece as well. And then I think final question, just do do XSG get tangled up in the washing? Well, that's that's part of the magic really and and why we've worked so hard to get get our cycles right over the years. So we we probably have the the world's experts on washing and how what happens to pockets during the washing process within our within our staff, particularly when it comes to denim as well.

57:26 So we we know how to make it work in the most effective way possible. So it's about how you spin it, when you wet it, what you do with it during the process, which way you're spinning it, which way you're spinning it back. So, yeah, the idea is, you know, we are seeing on a very, very regular basis, you know, no XORs left in the in the cycle after the work has been done. The interesting bit on that is that, you know, a lot of machines are sold on capacity. So if anybody has had the choice of buying a new washing machine recently, Firstly, you're probably being quite underwhelmed by the experience. You'll have been sold probably on, capacity of indeed spin speed still seems to be the way, maybe a lot maybe to a certain degree on efficiency of it as well. But the reality is that the the machines are actually getting slightly bigger in terms of their capacity.

58:14 But, actually, the the the amount of washing that people are putting into has not increased. So you will there's actually an awful lot of space, if you like, for the movement, which is great because it gives us a really good opportunity to be able to influence that process and and get the benefits of the the XEROS technology, but also there's an awful lot of space for them to be able to to to be captured as well. So, yeah, I mean, we've said on a number of occasions, we've we've got people within this business that have been working fine tuning this technology for for decades in some cases. It feels a bit like alchemy, a bit like magic, but it works, and we prove it out time and time again. Yep. That's great. Thank you both for answering those questions. Before we ask investors to share their feedback, which I know is important to you, Neil, if I could just ask you for a few closing comments to wrap up with, that would be great. Yes, sure. I mean, I've kind of mentioned this, so maybe I'll repeat it little bit again as well, which is the business is actually in a really, really good position at this moment in time as well.

59:12 So we have good cash in the bank. We have some really, really high quality partners, has been a honestly, that's been a really hard work over the last two two and a bit years, two and a half years since we kind of got our ducks in a row under my leadership. That's really starting to come to into fruition now. And then we've also got just ever ever greater awareness, either of the benefits in terms of fabric care or indeed when it comes to micro fiber filtration. The the industries that we're targeting really want solutions to to to to the problems that we're addressing with our technology. So, I mean, look, I'm I'm confident Alex and I sit here today, and I feel like we're in a good position. We have got work today. I can constantly say that to the team. We are by no means there.

59:59 And it's because, for me, success is not just about having a couple of partners launch our technology and all there. There we go. It's well, and it's done or or getting to a part where we break even. We don't take that for granted. I'm very much focused on how we can get this technology into the hands of the right partners and as many partners as possible so that we can really kind of take this thing off. And I very much see that as, as probable at this moment in time. So I think, yeah, with with ongoing support from from the likes of our our our loyal investor base, I I very much feel like we're gonna do it. So thank you. Thank you both once again. Ladies and gentlemen, class that you don't close the session just yet as you'll now be automatically redirected to a page to give your feedback, which helps the company better understand your views and expectations.

1:00:46 On behalf of the management team, we'd like to thank you for attending today's presentation. I wish you all a good morning.

Follow Xeros Technology Group PLC into a list and get an email when it puts out news.

Latest news releases

Companies on this call

Speakers

Neil Austin

CEO at XEROS TECHNOLOGY GROUP PLC

Alex Tristram

Finance Director at XEROS TECHNOLOGY GROUP PLC

Klaas De Boer

Chair at XEROS TECHNOLOGY GROUP PLC

More from Xeros Technology Group PLC