Mark Perrins
CEO at STRIP TINNING HOLDINGS PLC
Replay available
Final Results for the year ended 31st December 2025 hosted by Strip Tinning Holdings (LSE:STG) on Investor Meet Company, held 2026-03-27.

On 6ix: 6ix.com/event/strip-tinning-holdings-plc-stg-final-results-for-the-year-ended-31st-december-2025
Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.
0:00 Good morning and welcome to the STRIP TINNING HOLDINGS PLC twenty twenty five Annual Results Investor Presentation. Throughout this recorded presentation, investors will be in listen only mode. Questions are encouraged and they can be submitted at any time using the Q and A tab situated on the right hand corner of your screen. Just simply type in your questions and press send. Before we begin, I would like to submit the following poll and I would now like to hand you over to CEO Mark Perrens. Good morning. Good morning. Thank you and welcome everybody to the twenty twenty five annual results presentation for STGPTINNING. I'm Mark Perrens, CEO and I'm joined here with Kevin Edwards, our CFO. Right. Right. I will take you through the slides, give you an update on on where we're at.
0:47 So just some highlights to start, in terms of revenue. You'll see we came in at 8,600,000, which is 5% down on last year. That was anticipated as we switched the portfolio from the old traditional lower margin products into the higher tech areas that we're now focused. And with this year being the year where our volume really starts to ramp up to 13,200,000. You'll see with the next bubble layer that adjusted EBITDA's improved 75% on 2024, coming in at a 500,000. That's a reflection of the good work we've been doing on efficiency improvements throughout last year. Again, reflected in the gross margin being 22% better than the previous year at 40%.
1:35 And you can see in the graph on the bottom left, steady progress that we've made since 2022 year, improving year on year our gross margin. We were able to finish the year with slightly more cash than we did in 2024 at $600,000 and we generated $1,600,000 in cash. We did that really through catching back on some of our R and D tax credit claims, reducing inventory and focusing on debtor days have really helped us in the year with cash through those items. We've also been working with our customers on the contract terms in relation to items like tariffs. So previously the tariff with Inca term for us was we were responsible and that has now changed going forward. The customers responsible for the tariffs is really good for us. Also consignment stock, which is going to tie up a lot of working capital is now not required, which means that the sort of payment terms are ticking from when we're shipping from The UK to The US. That's really helped us.
2:46 So we're positive on those items. In terms of our other two major projects, so the first one is a PDLC roof glass connector project. We've been supplying the BMW iX for a number of years. Switched in terms of the glazer. BMW switched that to a new glazing company, which we run the business with. So we've been supplying those parts several thousand connectors a week since June last year. We're now introducing the variants for the Audi Q7 and Audi Q9 through that same cell. So the Audi is live this month and the Q9 is coming along Q2, late Q2.
3:33 So this is good work through to 2031 for us. And we're talking with the tier one about some further projects for other OEM vehicles. The third of the projects is for the Mercedes CLA vehicle. Image is an example of the PDLC roof glass. So it's quite a nice feature in the vehicle. You can have different segments of the front passengers or the rear passengers can have the glass clear or opaque. You can see the little Mercedes symbols also in there. The demand for this vehicle is really positive. Recent Mercedes Benz sales board member said that if you order a CLA now, you're going to be waiting six months for it. And we've seen that in the strong volumes that we're getting asked to supply on this. So it sort of ramps up over the next few months to kind of five digit monthly volumes.
4:29 So a really good project for us. So all three projects are going well. We've seen strong volume on them all. We've done the industrialization and we're working on the ramp up phases of the vehicles, which puts STRIP TINNING really at an inflection point volume up to. I'll hand you over to Kevin now who will take you through this revenue bridge. Hi, this is the revenue bridge from '24 to '25. As you can We achieved our market expectations for 2025, so most of this was expected. But as you can see, the new programs are starting to grow in revenue terms.
5:17 Unfortunately, some of the older connector business has tailed off through 2025, but that was as expected, really. So achieving just above our market expectations of 8,500,000 Margins are holding up well. Margins on the PT were very strong in the year, predominantly because of the C samples and D samples, as Mark mentioned, achieving 67% in the year. However, these will fall back as we reach serial and start to steady out at just on 40% gross margin or just above 40%. As the new glazing projects come on and the older ones fall off, we should see glazing margins move from 32% up towards the 40% mark as those new programs start to deliver higher volumes.
6:17 In terms of our P and L for the year, below the gross margin level, we've already worked hard in the year to control our costs, so reducing our staff costs by some three quarters of a million pounds. And our overhead costs, we've looked at very all of our overheads and made sure that we kept them as low as possible, achieving a year on year saving of 166,000, which is really good to see. As we ramp up in the business, we'll see those costs increasing, but revenue is on target for 2026 at 13,200,000. So we are moving towards EBITDA profitability in 2026. In terms of funding for the twenty five year, we've worked really hard to improve our debt funding.
7:07 In the year. We've improved our debt funding on our CID facility. And also with regards to asset based financing, we've we've achieved quite a lot in terms of asset based financing in the year. We're still working on other opportunities for debt financing as we move to profitability over the next six months in order to in order to give us both a contingency as well as giving us some funds to take on new opportunities as they become available. Okay, so in terms of our outlook, the business, the sort of squares at the top is just to show where our focus is. So Q1's been all about preparing for the launches.
8:00 There are six pipeline projects we're also working on, which I'll talk to you about shortly. But Q1 all about preparing, Q2 about delivering the launches, Q3 will be about the efficiency improvements that often require post launch and driving down scrap, etc. And we'll start to turn our attention to new business development in Q3 and Q4. A real full focus on the new business pipeline and as the three projects are executed and underway. In terms of that pipeline, there's six projects that we've been working on, one of which we're part of a grant consortium, which is a more for future revenue and quite R and D based project.
8:46 But we have a number of others which can be BuzzBar, FPC only or laminated BuzzBar. There's a range of projects that we're working on with future potential. We actually have many, many more projects that come to us. We often fortunately have to turn down because of the limited resources we have. So we're very focused on executing the three projects this year, but very keen to kick on with others when we're in a stronger position to do that. And the house on the left is really just to reflect that the walls are as good as the foundations, the roofs is as strong as the walls. We did a business turnaround in '22 to '24.
9:31 That gave us the foundations to go and win the three major projects which we did in '24. Our first pillar this year is all about delivering it and showing we can make real volume in this factory tech area. We're scaling the business up and just recently expanded with a further industrial unit on our site. And then we will capitalize on the sales opportunities that these strong pillars give us towards Q4 of this year. So basically, that is the slides I have for you today. But in terms of summing up, 2025 was a good year for us. It's difficult year with many headwinds that businesses have faced, particularly in the automotive space.
10:20 We were able to focus strongly on our costs and control those and improve them. We were able to give good customer service and demonstrate execution on our projects and a number of our customers have visited and are happy to see where we are with that. This year, we're really at the point where we'll start producing volume on these projects and that will come through in our numbers and hopefully in our share price as well. So thank you for today. That's great. Thank you very much indeed for your presentation. Ladies and gentlemen, please do continue to submit your questions using the Q and A tab situated on the top right corner of your screen. While the company take a few moments to review those questions submitted today, I would like to remind you that a recording of this presentation along with a copy of the slides and the published Q and A can be accessed via investor dashboard. Mark, at this point, if I may hand back to you to take us through the questions and I'll pick up from you at the end.
11:16 Great, thank you. Okay, just looking at the first question from Richard there. Thank you for the question. Could you talk about your competitor environment in BT and smart glass? Is there a Chinese threat? Good question. Of course, unfortunately there's always a Chinese threat. I think you see in some of our numbers how we've been pivoting our portfolio away from the more traditional OEMs that are certainly coming under attack from companies like BYD in terms of market share. Are less exposed to automotive than we were, so some of our projects are on e bikes and off highway vehicles away from automotive.
12:04 That concerns us less if I take that Mercedes CLA, for example, that's on a platform. So there's also hybrid petrol for BEVs. So irrespective of consumer choices on that, the PDLC glazing connectors still on that vehicle. So that gives us confidence. In terms of the Chinese threat, would say for some of the traditional connectors, they have gone to China, but they were lower margin. We get a lot of inquiries because customers don't always want to go direct to China. They want an engineered service, they want interaction, they want to be able to come and visit. And we're turning down work all of the time with some customers coming back to us. And that's really because of the engineered service that we offer.
12:55 And I think the fact that the Chinese are adding a lot of content to their vehicles encourages mainstream Western OEMs to compete with that. So, as you see from a kind of PLC roof, that content's going into match Chinese cars. It also provides an opportunity. Thank you for that question. Second question from Gary, with battery tech revenue more than double, how much of this is contracted versus pipeline? Kevin, would you like to answer? Yeah, most of our work for 2026 is already contracted, so already delivered and more than 84 work for '27 is already contracted within our current volumes.
13:42 We still have a small amount of work that we're on the six projects we're working on to deliver '27, but I believe the pipeline is sustainable. So, thanks Kevin. Obviously with the Zooch project being a big project for us, that already guarantees a good proportion revenue and the other work we have is contracted. Only a small amount of pipeline in there, but an opportunity for a much bigger pipeline going forward. A third question here, with the gross margin improvement to 40%, do you see this as sustainable as volume scale and the new project ramp up?
14:28 In terms of gross margin pre production phases, there's always multiples and things and that covers some of the R and D and the development that goes into that and supply chains where multiples are often common. It will more normalise with serial production, but we're confident that the product offering being of a higher tech means that there isn't a lot of value add in the product. And that's really why we've pivoted the portfolio away from more of the commoditized products to a higher tech product. And the other thing to say about that is, as scale and the volumes become greater, there's greater opportunities for us to look into our supply chain and optimize some of those and keep the costs down on the serial production, so therefore helping the margin to remain above the 40% margin. I do think it is sustainable.
15:31 That's great, Mark. Kevin, if I may just jump back in there and thank you for addressing those questions for investors today. And Mark, before I redirect investors to provide you with their feedback, which I know is particularly important to yourself and the company, could I please just ask you for a few closing comments? Yeah, thank you very much. We thank you everyone for your time today and particularly to those who submitted questions, very useful. The business is really pleased with the progress we've made. We're with some very big successful companies that have great futures. We're in a tech space that's moving all the time. Loads of opportunity for us going forward. We're very keen to launch these projects and demonstrate our serial capability on such volume tech.
16:19 And with that will bring us many, many opportunities and we look forward to talking to you about those the next time. Fantastic. Thank you once again for updating investors today. Could I please ask investors not to close the session as you now be automatically redirected to provide your feedback, which will help the company better understand your views and expectations. On behalf of the management team, we'd like to thank you for attending today's presentation, and good morning to you all. Thank you very
Follow Strip Tinning Holdings PLC into a list and get an email when it puts out news.
CEO at STRIP TINNING HOLDINGS PLC
CFO at STRIP TINNING HOLDINGS PLC