Maisa Keskes
Analyst
Replay available
PVA TePla (Xetra:TPE) Q2 2026 earnings call, held 2026-08-06. Watch the replay and read the transcript on 6ix.

On 6ix: 6ix.com/event/pva-tepla-ag-0nl1-q2-2026-earnings-call
Automated transcript · Written by software from the replay's audio. It can mishear names and figures; the replay is the record.
0:00 Good morning everyone and welcome to the earnings call of PVA TePla AG for Q2 and the first half of 2026. My name is Sebastian Gonsior and I'll be moderating today's call. As usual, CEO Jalin Ketter and CFO Markus Groß will first walk you through the results for Q2 and the first half of 2026, and then share their outlook on the rest of the year. After the presentation, we'll open the floor for your questions. A quick housekeeping note before we start, this call is being recorded and a replay will be made available on our website within the day. With that, let's get started and Jalin, over to you.
0:37 Thank you, Sebastian, and good morning, ladies and gentlemen. Thank you for joining our earnings call. We will take you today through the first six months of the year of the development of PBI TePla. But yeah, I'm afraid that anyone who joined the call today expecting a lot of news will be disappointed because we are on track and this is good news because we are executing what we set to do. Let us look back one year and let's recapitulate where we have stand. We were in the middle of our transformation and we had clear targets, high expectations, but we were still rolling out the measures needed to get there.
1:29 And today we are one year later and we can see that we have come a good way. Our technologies are widely accepted in our target markets and we have made significant improvements across all of our business segments. In the areas we identified as important, we have started the necessary changes and this applies for example to an efficiency improvement program in the material solutions segment beyond others. But of course, not everything is in place yet because transforming our organization is something which is a long-term process. And not every measure we have implemented also shows results immediately.
2:17 All in all, also the last quarter assured we are moving in the right direction and we will follow the path we have chosen. The coming quarters will show that our strategy is gradually taking effect and that we also be reflected in our figures. Before our CFO, Markus Groß, takes you through the H1 results in detail, I would like to give you an overview on a few key aspects. And I'm pleased to report a solid demand and improving performance across our business. Our order intake increased by more than 80% year-on-year in both segments.
3:03 Material Solutions and Metrology supported this outcome. Metrology is contributing a growing share of our group revenue and in Material Solutions, we expect a recovery in the second half of this year and also beyond. To support our margin targets in that In this area, we rolled out an efficiency program to improve our profitability. Compared with the first quarter of 2026, our revenue and earnings have improved. Our strong order book gives us visibility for the coming quarters and we expect revenue and earnings to improve gradually.
3:51 And considering these points, we confirm our full year guidance 2026 with an EBITDA expected in the lower half of the guidance range. So you can see we are progressing. Quarter by quarter, our performance is improving and we expect this trend to continue. We are doing that step by step, and we are very confident that this will bring us back onto our growth path exactly as we have planned. So with saying that, I now hand over to Markus before we are coming to the strategic part again.
4:30 Thank you, Jalin, and a warm welcome from my side, and good morning. So let's directly start with our group revenue. and after a rather soft start into Q1 of 26, we're seeing a quarter over quarter increase of 20% up to almost 66 million, which means we're seeing an 8% increase year over year in Q2. Both segments contributed to this development. So we're seeing a 7% increase in material solutions and 9% in metrology. Looking at H1, the revenue is more or less at the same level as in the first half of 25.
5:21 But in detail, Materials Solutions is with 67.6 million in revenue, 10% below the first half of 25. But based on our order book, we expect this development to turn around in the second half of 26. And on the other hand, Metrology is with 53 million, 20% above the first half of 25. And this shows the success of the group's strategic transformation. Looking at the order intake, we're seeing an increase of 13% in the second quarter of 26.
6:09 and with 30 million in material solutions we are having follow-up orders for compound materials like indium phosphide. In metrology 35 million means we're a bit above the expected run rate of 30 million. The first half is a great success from our view and the sustained customer demand for advanced semiconductor materials is shown with an increase of 80% year over year in the first half of 26, with 89 million in material solutions and almost 100 million in metrology. Looking at the development over the single quarters, we can see that Q1 was exceptionally strong.
7:01 and with Q2 we are returning to a more normalized level. As I said, metrology with 35 million is above the expected run rate of 30 million and material solutions with the project nature of the business is more lumpy, but the underlying demand environment is intact and looking in the direction of H2. We're seeing a continued demand in our target markets coming from our structural growth drivers. So for the second half of 26, we expect the order intake to remain at a solid level, but again showing some volatility due to the project business and material solutions.
7:47 For metrology, we are very happy to report to you that our existing product lines in H1 of 27 are already at full capacity and the production lines currently under construction are also quickly filling up. And with the first orders we received for 28, our visibility is also increasing. The group's profitability is improving in the second quarter But H1 results remained impacted by lower utilization and one-off effects. Generally speaking, metrology and its gross profit margin is on the expected high level.
8:39 But the material solutions were a bit below, especially if you compare it with the first half of 25, where we had a very strong product mix And with the large orders we received in the last quarter of 25 and the first quarter of 26, we're still in an engineering and sourcing phase. This means the revenue contributions are still low. And in some areas of our group, we're suffering from underutilization because the production hasn't started there yet for these projects. But this will turn around in the second half of 26. Based on the order book, we can see that the margins, the gross profit margins in material solutions will improve and also the underutilization will end.
9:33 As I said, we're seeing an improvement in the quarterly profitability. If you look at the gross profit margin, which was 30% in the second quarter, we were coming from 28.5. And for the upcoming quarters, we expect the gross profit margin to increase gradually. Both segments combined had then 29.3 due to the week first quarter. The EBITDA and the EBITDA margin were impacted by one-offs. So the EBITDA in the second quarter reduced from 6.7 down to 3 million. And here we are having non-period expenses, which impacted the second quarter of a little less than 4 million.
10:24 The most relevant here is the recognition of a provision for potential compensation with a customer in material solutions. Looking at material solutions, we can see a continued order momentum But the profitability is currently not where we want it to be. As I said, gross profit margin is impacted by the product mix and underutilization and also the EBTA by non-period expenses. For the moment, or as of now, we don't see any effects like we had in the second quarter for the rest of the year.
11:10 We expect the gross profit margin to improve. and the recovery in the margins in the third and fourth quarter. In metrology, we're seeing a continued growth in revenue and the order intake. But the EBITDA is currently impacted by strategic investments, which are temporarily waiting on our profitability. These investments are in our infrastructure for sales and services, and also increased R&D activities. The second quarter also was impacted by expenses for free demo systems, which decreased our EBTA in the second quarter as well.
12:02 So wrapping it up. In the first half of 26, we achieved revenue of 120 million. For the third quarter, we expect a revenue in the direction of the second quarter of 26 and an acceleration in the fourth quarter, which is coming from our order book. So we're very confident here. The EBTA in the first half has been heavily impacted by one-offs. And due to the stabilization and increase in the gross profit margins, and especially in the fourth quarter with the product mix and material solutions, we're expecting to be in the third quarter approaching double digit levels again.
12:52 And confirming our guidance in terms of the revenue and also in terms of the EBITDA, but we see ourselves here at the lower half of the guidance range. So that's it from my side, and I'm handing back over to Jalin.
13:08 Thanks, Markus. Let me give you an update on our strategic initiatives. We are increasing also synergies and efficiency across our group, bringing things together that belong together, focusing on the things that are having most growth potential for us within our strategic markets. And that also means that we step by step drive the organization to new requirements, which are coming on the one hand side out of our target markets, but also from the new clients where we are qualifying ourselves as a vendor. I would like to briefly go and explain two key aspects in this context.
13:53 You remember that next to our acoustic methodology, also the optic methodology is an important field of technology within PWA. And with this technology, we have been addressing very front end related markets in the past with more manual systems, half automated systems, a little bit similar to what we have seen as a development on the acoustic side where we started there. Our roadmap that we are having in front of us and where we agreed internally to execute that will clearly bring us to more backend related, more packaging related applications, which we will address then also with more automated systems. So yeah, bringing more volume into that business.
14:42 To focus our team on that path, we are further consolidating all of our optical metrology activities in one organization into PVA Vision. And this also means that we finally built a center of excellence for our optical metrology in our facility in Dresden. This move further enhanced our organization and is also consolidating resources, bringing people together to focus them really on activities with the most important growth potential. In order to support the efficiency on our material solutions business, we have placed a strong focus on our profitability. We are redesigning our operational processes and we started with that at one of our sites as a pilot.
15:36 This includes initiatives such as introducing new processes but also leadership structures. We will have a rollout phase for other facilities as soon as we have validated the processes that we implemented and the success that we see from that. This activity is part of our long-term margin grid strategy on the material solutions side. will impact the impact of that activities will get visible over time so there is not a one-off effect that we will see directly but a gradual and development i also want to focus on some important technology developments in material solutions today as inium phosphide is an enabling material for the communication between data center We drive our R&D efforts in this field and focus within our long-term targets on that. And we also know that there is a huge interest on your side to learn a little bit more how these activities are contributing to our targets.
16:48 Artificial intelligence is fueling this demand in indium-phosphate substrates, but also then, of course, in our furnaces. And there's the shift from smaller waver sizes to larger six-inch wavers at the moment, which is combined with a structurally tight supply. And this creates a real opportunity for us to move into that market. Our proven technology and also our delivery capacity are bringing us to a very good position to win qualifications and to also support that very fast ramp up phase that our customers need now. Our internal estimates point to a very high demand of furnaces in this market and our current expectations are leading to a rough volume between 500 and 600 furnaces in the base case scenario.
17:47 But as competition in this area comes more from internal design, we expect the addressable market down to 20 to 30 percent of the total market. And with the position that we are having in that field, with the equipment available at that right time, we are very confident to win a significant share of this addressable market. Let me finally give you an update also on our mid-term R&D pipeline. We already have mentioned our activities in a very promising material, aluminum nitride. In prayer calls. We are primary partner in all major European aluminum nitride activities already today and supporting the scale up in this next generation semiconductor material.
18:45 It's a material which is very important for high power applications. Our role in this field We have developed now from providing the R&D equipment into also owning the process by ourselves. So that means that we are preparing ourselves to have the full solution available at the time when the market is bringing that material to an industrial use. and bringing us in a very good position for that as well. Both research and industrial ramp up keeps us in the forefront of innovation in power electronics and UV photonics. Ladies and gentlemen, as you can see, we are following a clear roadmap to deliver our strategy.
19:34 And that does not happen overnight, but the progress is visible and we will keep moving forward in that regard. So thanks for your attention now, and we are happy to take your questions. All right, thank you very much, Jalin and Markus. And we will now open the floor for your questions. And as usual, we kindly ask you to limit yourself to about two to three questions per person at a time so that we can give everyone a chance to also participate. And if you, of course, have further questions, you're welcome to re-enter the queue or contact us afterwards, of course, for a one-on-one. So I see the first one is Maisa Keskes.
20:14 Hi, Maisa.
20:16 Can you hear us? Good morning.
20:21 Hello, can you hear me?
20:23 Yes, good morning.
20:24 Good morning. Thank you for taking my question. I will start with the first one. So Siltronic mentioned last week that they are in close discussion with their key equipment suppliers regarding additional equipment for their Singapore fab to prepare for the expected recovery in the wafer demand. Could you share whether you are seeing similar momentum in customer discussion and how should we think about the timing of potential orders Is this something that could materialize over the coming quarters or is it more likely for 27 with deliveries taking place maybe before 2028?
21:04 So we are not commenting on single customers at all, but let me give you an overview on the silicon market and how we see contribution to our activities. I already said that in that timeframe until 2027, we see a higher demand on waiver capacity coming up and this will We expect a good contribution to our mid-term volume targets coming from that investment phase.
21:52 Okay, thank you. And you highlight that you are already seeing some initial reservation for new meteorology capacity for 28. Could you provide more colors on this demand? I know that you don't disclose the name of the customer, but maybe indication on the geographical mix and an indication of the level of the backlog expected for 27 and 28.
22:16 Yeah, it's coming from two areas. So it's the North American market and the Asian market, which is already contributing to that. What we see is that we are now through that qualification phases, which means that we are getting more and more transparency on the volumes that are expected to invest over the next years. And that brings us to a point where we have already visibility over the next years, partly also into 2029. The order intake is developing more gradually, so step by step increasing, which is coming from two areas. On the one hand side, we are working with forecast related plans with our customers, so orders are getting in the book step by step.
23:10 TePla AG, Gert Fisahn, Elke Kleemann, Carl Markus Groß, Jalin Ketter, Sebastian Gonsior You remember that we announced in the first quarter that we closed our site in Coburg and consolidated the optical or the people which were working in the optical business to our team in PVA Vision. So we are focusing with our capacity. on the most important things and this also brings the order volume from activities which are not having too much scale potential a little bit down and they are already compensated by the volumes coming from the new qualification processes. Additionally, that old markets where we have been in from that ultrasound methodology are not as active today as they have been before.
24:17 So there is a change in our order book from that more manual and semi-automated system technology to that high volume activity. So we already had a recap to that in TePla AG, Gert Fisahn, Elke Kleemann, Carl Markus Groß, Jalin Ketter, Sebastian Gonsior That volume area significantly over achieved that more manual system area. So that change has to also you have to take it also in consideration when you're having a look on how that volume or order volume is developing on the methodology side.
25:10 Okay, thank you.
25:11 Very helpful. All right, thank you. Michael Kuhn is next.
25:24 Good morning. Good morning. Good morning, Michael. Kind of follow up on, let's say, backlog and metrology equipment. At some point in the presentation, I think you mentioned that your production is kind of running at capacity and that you're adding production lines Maybe you could give some context in terms of how much of a sales volume you are currently able to handle, maybe on an annualized basis, and what your, let's say, production growth plans would imply in terms of annual capacity into 27 and 28 years.
26:09 So the actual capacity that we are having, when we foresee how that orders that we are now getting and that are forecasted are contributing into 2027, then for the first half year, everything that we are already having for that volume business today is already used up. We are working on a ramp up of that capacity, which will go live until year end. And that brings us to a higher capacity starting from 2027, which is already also starting to fill.
26:55 Okay, so that would be current capacity closer to maybe 100 million annual sales and then a significant step up towards year end. Is that a realistic way to think about it? roughly okay then secondly on qualifications with customers obviously you are making progress here you mentioned during the call that you also delivered more free demo systems can you share with us How many qualification processes you're currently in and maybe what timelines you would roughly expect until those can be finalized?
27:44 Yeah, so the majority of qualification processes that we already talked about that we are in has been finalized. So we are in the volume business now with these customers. So there are some additional accounts where we're working on where we are not in volume yet. So Half of the big players, we are already in close contact and final agreements with, and the other half is something where we are working and when we are taking this split, I think then we are in line with what we are doing.
28:21 Okay, excellent. And then last question on Indium Phosphate. TePla AG, Gert Fisahn, Jalin Ketter, Sebastian Gonsior Can you share with us, let's say, on which timeframe you expect this market opportunity to materialize? Is that something for the next three years, five years, maybe to get a little more of an understanding here and maybe also a rough indication what the price tag for such a furnace would be? Yeah.
29:07 So as framed on the slides, we see that market development from 2027 to 2030. We already have the first orders in our books that we are executing. In 2026, it's a very low volume. That's why we excluded that already in that forecast. And starting from 2027, we see an increase of the volumes. We see the market very strong growing until 2030 and then we have to re-evaluate over that time frame how the general market is developing and if there is a higher demand again for photonic activities.
29:52 So this is something that is hard to already disclose today on. But we are on a very well position to qualify ourselves at these activities. We're already working with customers in that field. And with the addressable market of 20 to 30% of that total volume, we think that we really win a high share of that open market.
30:23 Understood. Thank you. Okay, Hartmut Mörs, please.
30:38 Good morning. Can you hear us?
30:48 Hartmut? Okay, apparently there's some technical difficulties.
30:56 Well then, Konstantin Hesse, please. Good morning. Can you hear me?
31:05 Yes, good morning, Konstantin.
31:07 Perfect. Morning, morning, guys. OK, so three questions for me, and then I'll jump back to the queue. Look, I want to start a little bit with setting expectations here. We are now in a situation where you're guiding us towards the lower end of the EBITDA margin guidance because of profitability being weaker in the first half. If I look at the second half, I mean, the jump is substantial, right? We're going from 4.4 million in EBITDA in the first half. You guided us for Q3. Q3 looks like it's going to be in the range of Something around 6 to 7 million, which means we need at least 16, 17, 18 million in Q4, which are margins north of 20% in order to even deliver the lower end of the guidance. So I want to understand a little bit what the visibility is here and how confident you are.
32:05 What are the risks that we could potentially see another guidance downgrade? So let's start with that question, please.
32:17 Okay, sure, Konstantin, I think these are valid questions. So our guidance for the second half is based on an updated forecast we're having here. And most of the revenue we're having in the second half is coming from our order book. So we have a quite good visibility there. And this means we can also quite good assess the gross profit margins we're expecting from these orders. And so giving all of these in combination brings us to that we see ourselves in the EBTA in the lower half of the guidance. So we have quite a good visibility there. And you asked for risks. So obviously there are things we can't control, but looking at it currently, we're quite confident there.
33:06 Can I just understand what are the risks that are execution related or anything that could potentially lead to lower numbers?
33:16 Yeah, it's execution related. There are things we can't control. If a customer says, yeah, don't deliver the system and it's revenue recognition at the point in time, then that doesn't work. But currently we're looking at this. We were quite confident there.
33:32 Understood. Okay, thanks. Same question. Just an order intake momentum, right? I mean, metrology obviously picked up sequentially, and we saw a bit of a decline in material solutions. Just thinking about Q3, Q4 cadence here. So the... What you've been communicating is that we're going to see an acceleration in the second half, I think mostly in Q4, but we will probably already see an acceleration in Q3 from what I understand. Can you just give us a little bit of an idea? So that's on the metrology side, right? I want to understand a little bit the material solution side as well, because obviously that is quite lumpy, but just trying to understand from this Q2 level, TePla AG, Jalin Ketter, Sebastian Gonsior
34:31 So yeah, in material solutions based on the projects we're currently discussing, we're looking confident that we will be on a very good level comparable to H1. But if it's then in Q3 or in Q4 is currently hard to tell because it's depending on when we will close the contracts there. But for the ongoing discussions, we're looking confident in terms of there. And metrology, you're based on the forecast. We're expecting that it will gradually increase over the second half of 26 and then you'll be at a substantial level for you're going forward.
35:15 You mean material solutions, right? Not metrology?
35:17 Not metrology.
35:19 I'm sorry. So I understood. So which one was the material solutions? You expect similar level to H1 and then a gradual improvement in metrology. Is that correct?
35:30 I wouldn't say improvement, I would say development.
35:34 Okay, sounds good. Just a quick, just to understand this provision that you took in material solutions, what is that related to?
35:45 It's related to an older project with a customer where this is the best feasible solution for us, but it's an ongoing discussion. We are talking here about the provisions, so I can't go into much more detail here for the moment.
36:02 Was that a quality problem with an equipment and that could potentially lead to any revisions in whatever you have in your portfolio?
36:10 No, it's not a structural issue. It's one of its individual system for one customer we're talking about here.
36:18 Understood. Okay, I'll go back into the queue. Thank you. Thank you. Martin Jungfleisch is next.
36:31 Hey, good morning. Just on the ultrasonic metrology for HPM, right? So this high volume order for HPM depend on a certain tech insertion like hybrid bonding or is this particular design, for example, for 16 high stacks and not really designed for 12 high stacks? So just, yeah, it's this high volume order, well, orders, are they tied to certain, yeah, to tech inflection? And then maybe also on that, when do you know what kind of share you will get? Are these customers telling you they are dual sourcing, triple sourcing, maybe even single sourcing? Any call on that? Thank you.
37:12 Yeah, so the production processes of the HBM or the development steps are not important for the qualification. So it's important for 16 stacks and also for other More future related production activities. So it's just about the 3D structure and the quality control of that single levels. And there is not a restriction that we are seeing from the technology side that we cannot see something because there are changes in the process. So it's not important for us. The orders are coming step by step. So what we see or maybe what changed also in our expectation from last year is that They are not placed in one-off orders in volume.
38:12 It's a forecast that is closely discussed with the customer and where we are step by step getting the orders into our books. So it's more a continuous process. With our expectation on our targets that we set to win market share, We expected that normally this kind of customers are working with a dual source or sometimes also triple source concept. We are seeing not much competition in that field today. But we are also with the targets that we set ourselves are not expecting to be everywhere as a single source supplier.
38:57 Not to win all the customers, but we are making good progress to further move into that market and not seeing much traffic on that side. Okay. Edwin de Jong, please.
39:23 Yes. Can you hear me? Yes. Good morning, Edwin. Good morning. Good to hear from you again. Maybe a little bit with a broader view. So we've seen investments in the semi-industry taking off quite a bit. So the expectations were for a $1 trillion industry at 2030 a couple of years ago, and now it's already approaching $2 billion. And you see everybody is investing more and more. We had, for PVA, we had, I think, addressable markets of 550 million for acoustic metrology, for instance, by 2028.
40:09 Given the higher investment levels, do you also have a changed view, or has there been any change in view of how your addressable market is developing?
40:25 We also see that activities and we also see that there are some further investment plans underway, but they are not... So it's still a little bit too early.
41:06 and then on silicon carbide. I get the feeling that they're changing a little bit there. So there's a lot of demand coming from data centers now and also on the automotive side, it seems to be on the brink of recovery. How is it with your position there and how is the 12 inch systems? Are you already having orders for them, for instance?
41:36 Yeah, so, yeah, silicon carbide is something that is continuously happening in our activities. So it's more a steady going business rather than coming in volumes. We also have, yeah, first discussions on the 300 millimeter side, which is something that we expect that it will be adapted in the market over the next few months. Yeah. On the market side, you're right. So the data center part is something which is driving the activities, but also automotive-wise, there is some activity starting to come up again.
42:21 And as you said, I'm reading a lot about the indium phosphide nowadays. Maybe getting back to a question of a colleague earlier. If you look at system prices for these furnaces for indium phosphide, should we think more about in the range of a silicon crystal puller or more of, let's say, silicon carbide furnace? What kind of direction should we think of?
42:52 It's between, but it's a, let's say, low one-digit million amount that we are talking about per system. Depending on the setup always depends on how improved the system is, what add-ons that has, and so on.
43:13 Okay, thank you very much. And then I say, maybe finally, on the optical side. and so on, the optical metrology. Do you have their applications for, let's say, signaling warpage, or maybe is it more for glass bonding, or what is exactly the high potential metrology part there?
43:41 Yeah, it's coming with the challenges on... The tension that is coming up. with that new bonding processes and the developments that we are at the moment seeing, which are also beneficial for our ultrasound technology. So everything where they are changing processes and where it's challenging to create new material combinations, to combine materials together, there is a lot of tension in the processes and this is a part of the activity where we are targeting for.
44:20 Because you are reading that that part of the market is growing and is starting to increase.
44:30 It's something which was very important for the front end area in the past and where we are also having a lot of activities on the front end side. And the importance of that activities are starting to move more into more back end related applications. And this is something where we are working together with institutes to further qualify technology in that areas and moving it to our customers. All right. Thank you very much. Thank you. Bastian Brach, please.
45:06 Good morning. My questions are centered on the organizational changes you outlined on slide 12. Can you roughly quantify the expected cost synergies in metrology and material solutions and when we should expect them to become visible? And the second one is, can you give a bit more color on which operational processes are being redesigned as part of the material solutions program? Thank you.
45:39 Let's split that question. So the financial impacts are coming more on the areas which we already announced in the first quarter. So there is that closing of the facility in Coburg where we are now consolidating our team activities and team capacity to that more growing areas. And that second step is TePla AG, Gert Fisahn, Elke Kleemann, Carl Markus Groß, Jalin Ketter, Sebastian Gonsior bringing a higher focus in the organization also bringing a better and easier work together having a facility on one site in our new site in Dresden with an application lab where they can work on the technology so it's more a focus rather than a restructuring part that we stepped into with that Announcement that we have done now on the material solution side.
46:55 We have some after growth targets that we also provided to you within our capital markets day last year. And when you see the margin groups that we want to achieve, there is still some way to go on the material side. And this is why we TePla AG, Gert Fisahn, Elke Kleemann, Carl Markus Groß, Jalin Ketter, Sebastian Gonsior TePla AG, Gert Fisahn, Elke Kleemann, Carl Markus Groß, Jalin Ketter, Sebastian Gonsior In 2026, we will see then step by step a positive contribution coming from that changes to our margin grid.
48:08 Okay, thank you. And do you have a timeline in mind where you want to complete the rollout?
48:18 Yeah, it's a continuous process that we are running there. But on that side, the majority of that restructuring is within 2027 done. So there is not much to do afterwards, but we always will have a look on that efficiency topic. It's not stopping. It's more a mindset change as well that we are doing in that area to always review the processes and go for improvement in that areas coming with that new markets. Because always when we are stepping into that more advanced market areas, we also have a need to change our activities in the production lines and in our service structure because it's different to what we have done before.
49:12 Okay, perfect. Thank you very much. All right, thank you. Adam Jakubowski is next.
49:23 Good morning.
49:24 Good morning. Can you hear me? Good morning. Yes. Yeah, great. Thank you for taking my questions. I have two questions. One is regarding the Indium Phosphide business. It regards the capacities. Would the existing capacity be sufficient if a business develops as you expected? Or is another larger investment program necessary?
49:54 No, that's as we expected. So we already stepped into the R&D steps in that and we further continue with the projects that we started and we are just catching the market now.
50:08 Okay, okay. And the second question. Your investment plans for 2026, as I understood it, the capex was expected to remain at the previous year's level. But in the first half of the year, it was only 7 million. Have you scaled the plans back or is there more to come in the second half of the year?
50:40 Yeah, so we're expecting more to come in the second half of the year. So it seems like we're lagging a little bit behind, but this is due to the planning. The majority of the capex will be in the second half then.
50:54 Okay, great. Thank you very much. Arjan Nordermeyer is next.
51:04 Good morning.
51:08 Good morning. Can you hear me? Yes. Yes. I just had a question about for the second half for OPEX. So OPEX would be like flat in the second half. Is it like something realistically that you can achieve? How so?
51:27 So the OPEX is expected at a lower level than in the first half because there were some non-period expenses and some one-offs we're not expecting for the second half.
51:40 Okay. My second question would be about optic metrology. How do you think you can differentiate from established players like KLA or other competitors?
51:55 We're not in competition with this kind of players. This is an area of the market where no one of the big players is sitting the same as in our ultrasound metrology.
52:06 Okay, that's helpful. My last question would be about Yeah, you talked briefly about customer qualification. I think last time you said there's still like the second Korean memory player that was in qualification. Is that already close?
52:27 Yeah, as I said, when we take the market with the big players, we are having half of the big players already qualified and the other half is something where we are working on. Okay, yes, those are my questions. Thank you very much. Thank you. Apos Capital, please.
52:52 Good morning. Good morning. This is Janus Ries from Abus Capital. Maybe some follow-on questions to the metrology area. There is a space which is getting hotter and hotter and maybe was not as well discussed as you built your midterm plan. It's co-packaged optics. How much is co-packaged optics, although something newer technology is used, and this may be widened up
53:26 It's also relevant in certain aspects and it's beneficial for that development. So when we are talking about increasing market activities on this area also means that we are further focusing our activities on these areas. Which means that... I think it's very important to repeat that on that stage. When you see the development on that acoustic market, please take in mind that there are activities which are not taking place anymore in that field and which are already covered with that high-volume part of the business. And there is a diverse field of activities.
54:12 It's also not only running into that just logic and memory, We are also active at other players, which are next to these kind of customers, like the OSOTs and so on.
54:30 Okay, that would be the next question. How important are OSOTs and will they get more important because they are followers with new technologies, maybe as customers? So far they are more important maybe for the years 2029 and 2030, is that right?
54:49 Yeah, it's the same. So it's in the same importance, just the volumes are different to the areas where we are at the moment talking about and where we are qualifying ourselves to. Yeah, so compared to that very big logic and memory players, there is also a very important activity for us with also a higher volume of players in the other markets. We are in that, but By customer, the volume is less than at that big logic and memory players.
55:24 Thanks a lot. On this optical space, will optical be larger than your original thought, or is it everything like that, maybe original planned?
55:37 We are in our plans.
55:39 Finally, you mentioned that you see not so much competition where you have maybe already designed in. If you're maybe with the other half of large customers, you are now still in negotiations, also come to a comparable result that your party get maybe sold suppliers. Is therefore the available market larger than originally thought because there's less competition?
56:08 This is a development that we have to take a close eye on. We are not expecting in our targets that we are a single source everywhere. Normally customers like that are working with a dual source concept and we did not expect to win every customer. in our target that we set it. So as more we are winning, as more positive this is contributing to our guidance.
56:38 Great. And really, finally, if I heard it right, and you confirmed it, Markus confirmed it, that in 2027 there should be a meaningful growth in metrology.
56:53 In 2027, we are having a higher contribution on the metrology side already because what we see as forecasts that are running into 2027 and also orders that are already placed in 2027 is showing us that the production lines that we are foreseeing and that we discussed with customers will be filled well in 2027. Thanks a lot. All right. We have a caller from the UK. Could you please state your name and then just briefly ask your question?
57:39 Good morning, everyone. It's Gustav from Fernberg. Thank you for taking my questions as well. I'll start with one. Morning, morning. I'll start with one on the one-offs and the lower EBITDA guidance for the year. What in particular was the cost surprise in Q2 relative to what you had previously? And could you, in that context, maybe also quantify all of the one-off effects that will go in your profits in H1, which will not reoccur in H2?
58:13 So I had some acoustic problems understanding your question, but if I got it right, you were asking for some more details on the one-offs. So these are all non-period related. The ones I mentioned in Q2 was being a little less than 4 million. The largest one is the provision, and then there are several smaller. One example here is that the LTI program running from 23 to 26. was at the end year 25 calculated with the Black-Scholes model and the development of the share during the first half where the market valuation increases relevant was not matching the expectation coming from the volatility in the model and this added on some additional costs here.
59:05 But there are several smaller, I think, It's not helpful here to go into much more detail with those, but happy to have a follow-up call with you.
59:16 No problem, thank you. So that was the surprise, I guess. Were there any other one-offs related to other things that we may have discussed in Q1 or so already that might have slipped our mind that will not occur in H2, such that you kind of get to guidance?
59:31 Yeah, so we factored everything we know as of today in our guidance, so we don't expect any surprises here, Dan.
59:39 Okay, great. Then a question on metrology. Obviously, down on the order index side, quarter over quarter, which was expected, which is fine, but could you give us a stare on how you see the ramp-up in metrology orders for Q3 and Q4, and maybe give us an indication as to whether or not you are feeling better or worse about the ramp-up in metrology orders expected for Q3 and H2 versus what you felt last quarter?
1:00:08 So this is a gradual increase that we are seeing step by step over the quarters, which is coming on the one side that we are making more activities out of that high volume areas, but also having an increasing situation on the order in total. We are having a better situation today as we had before because we are having a lot more transparency on what is coming next and what are the final investment plans of our customers. We will see that step by step in our orders. So it's not a one-off impact that we will see in one quarter where order intake is jumping up. It's more a steady development that we are now in and where we are seeing with that four to six months, depending on the customer lead times ahead that orders are coming in.
1:01:06 Great, and just to follow up on that, shall we base that on the order intake that you showed in metrology for Q2, or should we base that on the H1 order intake?
1:01:22 Q2, sorry.
1:01:26 Great, thank you. Last question for me on Indian phosphide. Obviously, last marked opportunity, and thank you for quantifying, but may I ask, Which customers do you have in Indium Phosphide today? And of course, I'm not expecting you to name any names, but it would be great to understand a little bit better where they are located geographically. Maybe you have a big spread, but it would be good to know which geography is the most important.
1:01:49 Sorry, but that market is so tight, we are not commenting on anything on that customer side. So we are already in agreements with customers and we are extending our activities in the market, but it's too tight to disclose on anything.
1:02:06 No problem. Thank you very much. Thank you. We're a little over time, but maybe let's try one more time with Hartmut Mörs. Maybe this time it works.
1:02:18 Good morning.
1:02:19 Good morning. Can you hear me now?
1:02:21 Yes. Good morning. Great.
1:02:25 So most of my questions have been answered already. I would like to follow up on the one-offs. Could you... Give a bit more color on the provisions you booked. So as I understood you, it was in material solutions, but what area of material solution and what is or was the problem without going into specific details and naming any customers?
1:02:58 As I said, I'm sorry, but we're currently still in negotiations here, so I can't go into much more detail. I can give you it's not a structural problem. It's an old model and it's a thing from the past. We don't expect these things to happen in the future here. And it's also a market we're not addressing in that fashion anymore.
1:03:25 Okay, and did you have any extraordinary so could you remind us in the first quarter was similar to that that do not reoccur in the second half of the year?
1:03:38 It's only the restructuring in Coburg but this has been also factored into our guidance so it's not something we would count into there.
1:03:48 Okay, and then we had already the topic that There must be a significant move in the fourth quarter. I mean, what you're saying is if we strip out the four million of the second quarter, then you would arrive, as you have guided in the third quarter, with roughly similar sales at a Approximating double-digit margins. So basically you were saying if we strip out the extraordinaries, Q3 will be very similar to Q2. But then there must be a major jump and you were saying... Sorry?
1:04:36 I think there are two effects you need to counter into your equation. The first one is we will see a continuous improvement in the product mix and the gross profit margin. So it's not only the one-offs you're seeing in the overheads, it's also that the gross profit margin is expected to improve in Q3, but also especially then in Q4 with the large orders coming into play. And also we're expecting The revenue in Q4 will accelerate in comparison to Q3 and this will then give an additional jump here.
1:05:13 And with regard to the product mix, so what is this shift coming from? You're saying the large orders, so you're basically talking about crystal silicon, right?
1:05:32 It's a mixed thing from material solutions, so it's not only one technology. All right. Sorry, that's all the time, unfortunately, we have for today. If you have any further questions, we're happy to take it offline and set up another call. But thank you, everyone, very much for joining in. And we wish you a great day. Thank you all. Thank you.
1:05:56 Goodbye.
Follow PVA TePla AG into a list and get an email when it puts out news.
Analyst
CEO
Analyst, Berenberg
Analyst
Analyst
Investor, Apos Capital
Analyst
Analyst
CFO
Analyst
Analyst
Analyst
Analyst