Lockheed Martin Corporation · NYSE:LMT
Lockheed Martin — Technical Presentation (March 2022)
10 slides from Lockheed Martin's technical presentation, March 2022
Slide 1: Contractor Approved Supplier
Contractor Approved Supplier Who Is That? Bob Bodemuller Supplier Quality Principal Engineer
Slide 2: Why A "Contractor-Approved" Supplier?
Why A “Contractor-Approved” Supplier? • The term contractor-approved supplier was first used with the release of DFARS 252.246-7008 in 2016. • The purpose of using the term is to recognize that it is the responsibility of the company to have a formal approval process for the use of an independent di
Slide 3: DFARS 252.246-7008 Supplier Categories
DFARS 252.246-7008 Supplier Categories • Grouped all electronic part procurements into three categories • Category 1 - Electronic parts that are in production or currently available in stock. • Category 2 - Electronic parts that are not in production and not currently available in stock from a categ
Slide 4: Who Are These Suppliers?
Who Are These Suppliers? Category 1: The contractor shall obtain such parts from • the original manufacturer • their authorized suppliers • or from suppliers that obtain such parts exclusively (directly) from the original manufacturers of the parts or their authorized dealers. Category 2: The contra
Slide 5: Source Qualification
Source Qualification • Category 1: - normal processes • Category 2: - identified by the Contractor as contractor-approved suppliers: • For identifying and approving such contractor approved suppliers, the contractor uses established counterfeit prevention industry standards and processes (including
Slide 6: Source Qualification
Source Qualification • Category 3: - • Promptly notify the Contracting Officer in writing. • Be responsible for inspection, testing, and authentication, in accordance with existing applicable industry standards • Make documentation of inspection, testing, and authentication of such electronic parts
Slide 7: Contractor-Approved Supplier Procurements Test/Inspection
Contractor-Approved Supplier Procurements Test/Inspection • For EEE components purchased from a source not authorized by the OCM and/or the OEM MFC requires the use the test and inspection methods defined in the AS6171 Standard (Test Methods Standard; General Requirements, Suspect/Counterfeit, Elect
Slide 8: Electronics Minimum Test Requirements
Electronics Minimum Test Requirements For procurements from Secondary Sources or a supplier who refuses the DFARS252.246-7007/7008 flow down. From Command Media 4-2-072, COUNTERFEIT AVOIDANCE AND SECONDARY SOURCE PROCUREMENTS 8
Slide 9: Summary
Summary 1. A contractor-approved supplier can only be used if: a) The part being procured is no longer in production AND is not in stock by the OCM or an authorized distributor b) Prior approval from MFC, i.e. a waiver to the DFARS requirements, has been obtained if the part is still in production b
Slide 10: Lockheed Martin
LOCKHEED MARTIN A
Lockheed Martin — Technical Presentation (March 2022) on 6ix