DuPont de Nemours, Inc. · NYSE:DD

DuPont de Nemours — DuPont — Technical Presentation (May 2011)

16 slides from DuPont de Nemours's technical presentation, May 2011

  1. Slide 1: Material Solutions — Turbo, EGR System: Friction & Wear

    Material Solutions — Turbo, EGR System Friction &

  2. Slide 2: Science of Friction Program: Friction Reduction

    DuPont™ Vespel® 2 Lubricant Science of Friction Program: Metal disc Material Polymer 45 – 55% V disc Design Friction P Temperature Reduction tryvespel.dupont.com T

  3. Slide 3: Science of Friction and Science of Wear Programs

    DuPont™ Vespel® 3 Lubricant Science of Friction Program: Metal disc Material Polymer 45 – 55% V disc Design Friction P Temperature Reduction tryvespel.dupont.com T Science of Wear Program: P V Material x Properties at 60 – 70% time Temperature Less Wear MP (T) Applied to Turbos & Emissions

  4. Slide 4: Market Needs: Turbochargers & Emissions

    DuPont™ Vespel® 4 Market Needs: Turbochargers & Emissions Long Life  Low Wear Predictable operation  Consistent Friction • Adjacent to exhaust gas (-40°C to 300+°C) • High potential for contamination • Acidic condensates • Often not lubricated • Increasing use of aluminum

  5. Slide 5: Science of Wear: Material Properties at High Temperatures

    WEAR FACTOR DuPont™ Vespel® ° Science of Wear: Understanding effects of material properties at high temperatures Composition vs. Wear (ASTM G-133) [ewe Composition Variable ¢ Typically, wear is studied by varying composition in a systematic manner, and then correlating trends.

  6. Slide 6: Science of Wear: Material Properties vs. Wear

    WEAR FACTOR DuPont™ Vespel® © Science of Wear: Understanding effects of material properties at high temperatures Composition vs. Wear (ASTM G-133) o er Oa Q Material property vs. Wear (ASTM G-133) R? = 0.9240 a, WEAR FACTOR Composition Variable Material Properties Group: MP (7, ¢ Typically, wear is

  7. Slide 7: Science of Wear Output: Vespel SCP family

    DuPont™ Vespel® 7 Science of Wear Output: New products for high temperature wear Vespel® SCP family: When compared to “Standard PI” (SP family) : • 60 - 70% less wear @ 343°C (650°F) • Step change in thermal stability @ 370°C (700°F) • 50% higher dry PV limits • CTE close to Aluminum & Stainless Ste

  8. Slide 8: Vespel SCP — Designed for Hot, Dirty Environments

    — A Vespel® SCP — Designed for Hot, Dirty Environments . ° Thermal Oxidative Stability Properties at 260°C (DF Parts) @ 370°C (700°F) for 100 hrs & 70psia 800000 mSCP50E0 50 G SP-21 = 600000 - g 405 s g om o a 30 | © 3 400000 - = Bs 3 §, 20 | “ ° ‘3 uF = 200000 - 2 10 - 0 | rt) == Young's Flex scp S

  9. Slide 9: Vespel SCP: Resistant to coke, soot & condensates

    VJUrFO " VESDVE Vespel® SCP: Resistant to coke, soot & condensates Better > Customer Testing Confirms: Successfully evaluated in 1) Resists Contaminate Build-up “chemical cocktails” at 2) Excellent wear in presence of contaminates elevated temperatures: EGR Valve Cycle Testing (in “poorly” tuned eng

  10. Slide 10: Embedded contamination can give longer life to metal components

    DuPont™ Vespel® can give longer life to metal components Theory: Wear or contamination particles embed into Vespel® parts, remaining below the wear surface and protecting mating parts. Metal Substrate: all Contamination Particles on Surface (note groove Contamination remains on surface . formation)

  11. Slide 11: Vespel resists wear, even in contaminated oil

    DuPont™ Vespel® 11 Experimental Results on Aluminum Die Cast: Intentionally DuPontTM Vespel® resists wear, introduced particles even in contaminated oil (~14 μm) Better  Vespel® SP-2515 exhibits 65% less wear

  12. Slide 12: Turbochargers

    DuPont™ Vespel® 12 Turbochargers Bearing Retainers Control Arms Vespel® Parts: • Survive harsh condensates • Resist soot build up • 300ºC continuous use • Spikes to 480ºC • Low wear in dirty environments • Lubrication not required • Consistent friction over life of engine Shaft seals & spacers

  13. Slide 13: EGR Systems

    DuPont™ Vespel® 13 EGR Systems Vespel® SP Parts: • Survive harsh condensates • 300ºC continuous use • Spikes to 480ºC • Self cleaning ports for smooth operation • Actuating speeds under 50m/s after 3.6 million cycles • Capable of complex geometry • Self lubrication Taiho Wahler

  14. Slide 14: Transportation Trends & Impact on Materials

    DuPont™ Vespel® 14 Transportation Trends & Impact on Materials System Trends Friction Temp Material Impact Engines Smaller + Turbos + New high temp valves & Very high Direct Injection controls operating at high sliding frequency velocities Emissions Gas IC approaching Low & -40º to 300ºC CTE match t

  15. Slide 15: The best time to involve us in a new project is before it starts

    DuPont™ Vespel® 15 The best time to involve us in a new project is before it starts. For more data and technical papers visit: tryvespel.dupont.com

  16. Slide 16: Contacts

    16 Steven Mok Ed McBride Thermal Systems Technology Leader 248-459-5380 (302) 999-2153 [email protected] [email protected] Randy White Volker Plehn Air Delivery Systems Kalrez® & Vespel® 315-597-0099 1-248-583-7921 [email protected] [email protected] John Hu

DuPont — Technical Presentation (May 2011) on 6ix