DuPont de Nemours, Inc. · NYSE:DD
DuPont de Nemours — DuPont — Technical Presentation (May 2011)
13 slides from DuPont de Nemours's technical presentation, May 2011
Slide 1: Material Solutions – Turbo, EGR System
1 Material Solutions – Turbo, EGR System In m & anc l st ca e te si mi gr re Re h e tu a C tio ra pe n Te
Slide 2: Downsized Engines Boost Demand on Materials
2 Downsized Engines Boost Demand on Materials Materials must RESIST: • Higher temperatures: Properties retention at operating temperatures > 170°C; peak 230°C • Increased pressure: Creep resistance to avoid pressure leakage at 3 bars • Higher acidity of EGR: Properties retention in contact with pH b
Slide 3: Responding To Market Needs
3 Responding To Market Needs Cross section of 4mm bar after aging for 1000 hours at 210˚C Standard heat stabilized DuPont™ Zytel® PLUS nylon GR PA66 • Just launched in K-Show (October, 2010) • DuPont™ Zytel® PLUS PA AND DuPont™ Zytel® HTN92 Series PPA • Outstanding resistance to thermal oxidation at
Slide 4: Long Term Aging at Hot Operating Temperatures
4 Long Term Aging at Hot Operating Temperatures ⇒ Better
Slide 5: Aging at Peak Temperature
5 Aging at Peak Temperature ⇒ Better
Slide 6: Minimum Creep to Maintain Dimension
6 Minimum Creep to Maintain Dimension ⇒ Better
Slide 7: Acidity of EGR - Strength Retention in Simulated EGR Solution
7 Acidity of EGR - Strength Retention in Simulated EGR Solution ⇒ Better
Slide 8: Thermoplastics Sealing Materials
8 Thermoplastics Sealing Materials FKM Viton® AEM Vamac®
Slide 9: Aggressive Coolant - Strength Retention
9 Aggressive Coolant - Strength Retention ⇒ Better
Slide 10: Integration / Savings in Turbocharging System
10 Integration / Savings in Turbocharging System ** AEM Vamac® & FKM Viton® deliver robust sealing performance exposed to oils, acids, on a broad temperature range
Slide 11: Integration / Savings in Liquid Coolant System
11 Integration / Savings in Liquid Coolant System
Slide 12: Conclusion
12 Conclusion Zytel® PLUS • Polymer Science: High-heat resistant, lightweight Standard materials PA66 • Integration Ideas: Experience in elastomers, resins and parts. Global technical and developments teams. • Faster “Art to Part”: Design, Materials, Processing … throughout the global value chain
Slide 13: Contacts
13 Steven Mok Ed McBride Thermal Systems Technology Leader 248-459-5380 (302) 999-2153 [email protected] [email protected] Randy White Volker Plehn Air Delivery Systems Kalrez® & Vespel® 315-597-0099 1-248-583-7921 [email protected] [email protected] John Hu