Weatherford International plc · NASDAQ:WFRD

Weatherford International — Technical Presentation (October 2019)

17 slides from Weatherford International's technical presentation, October 2019

  1. Slide 1: TruFrac Composite Frac Plug

    TruFrac Composite Frac Plug ® Optimizing Costs in Plug-and-Perf Operations TRUFRAC® COMPOSITE PLUG 1

  2. Slide 2: 85% of hydraulically fractured wells use plug-and-perf

    85% of all hydraulically fractured wells use the plug-and-perf method to stimulate multiple zones TRUFRAC® COMPOSITE PLUG 2

  3. Slide 3: Can frac plugs improve completion efficiency and well economics?

    Can frac plugs play an important role in improving completion efficiency and well economics? TRUFRAC® COMPOSITE PLUG 3

  4. Slide 4: Are frac plugs generally comparable in performance and results?

    Are frac plugs generally comparable in performance and results? TRUFRAC® COMPOSITE PLUG 4

  5. Slide 5: Weatherford Composites: 13 years of in-house R&D, manufacturing, and testing

    Weatherford Composites  13 years of in-house R&D, manufacturing, and testing Big of composite material Spring  Engineers on staff dedicated to composite material and product design Houston  Complete control over supply chain and quality TRUFRAC® COMPOSITE PLUG 5

  6. Slide 6: Composite Products Evolution

    Composite Products Evolution FracGuard FracGuard FracGuard GENERATION II GENERATION I  2 7/8”-9 5/8” Shorty Micro  12k psi, 350º  4½”-5½”  4½”-5½”  TB, IB, BP  8k psi, 300º F  10k psi, 300º F  >150,000  TB, IB, BP  TB & IB  >20,000  >8,000 TRUFRAC® COMPOSITE PLUG 6

  7. Slide 7: Efficiency Reliability Millability

    Efficiency Reliability Millability Run in speed Anchor & Seal Quick with Integrity small cuttings TRUFRAC® COMPOSITE PLUG 7

  8. Slide 8: The TruFrac Composite Plug

    The TruFrac® Composite Plug Efficient Reliable Millable 500 ft/min 10,000 psi 97% Premium 300ºF Composite TRUFRAC® COMPOSITE PLUG 8

  9. Slide 9: Molded Element System

    Molded Element System  Smooth surface  Provides a seal that is  Enables run-in speeds of rated up to 10,000 psi 500 ft/min with reduced and 300°F risk of flaring, sticking,  Prevents extrusion or presetting while holding pressure TRUFRAC® COMPOSITE PLUG 9

  10. Slide 10: Upper Slip and Cone

    Upper Slip and Cone  Combine filament-wound composite structure and powdered-metal buttons  Hold setting force in the plug  Mills easily TRUFRAC® COMPOSITE PLUG 10

  11. Slide 11: Lower Slip

    Lower Slip  Combines high-strength composite and small, hardened inserts  Provides superior anchoring force with minimal metal  Breaks up easily during milling TRUFRAC® COMPOSITE PLUG 11

  12. Slide 12: Mule Shoe and Pump-Down Ring

    Mule Shoe and Pump-Down Ring Mule Shoe Pump-Down Ring  Beveled design  Optional addition  Locks onto the plug to the mule shoe below it during mill-out  Decreases the amount of  Prevents spinning water used to pump each plug to its setting location TRUFRAC® COMPOSITE PLUG 12

  13. Slide 13: 4½" TruFrac Length

    4½” TruFrac® Length 23.44” ~26” (+7.5’) 27” (+10.3’) 28.59” (+15’) 29.7” (+18’) TRUFRAC® COMPOSITE PLUG 13

  14. Slide 14: 12,000+ Runs, 99.98% Reliability

    4.5” 8k – 1,600 12,000+ Runs 4.5” 10k – 1,800 5.5” 10k – 8,750 99.98% Reliability TRUFRAC® COMPOSITE PLUG 14

  15. Slide 15: Real Results: 10.5 minutes mill-out time

    Real Results  TruFrac® plugs Mill-out time, in minutes accelerated plug-and- 25 Industry average perf with an average 20 mill-out time of 10.5 minutes 15  15 minutes faster than 10 industry average 5  Location: Eagle Ford 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Plug

  16. Slide 16: True Facts

    True Facts Reaches run-in Achieves faster run-in, Reduces mill-out speeds of up to more efficient milling, time by up to 500 ft/min 50 % and smaller cuttings with a proprietary blend of 97 % premium composite material TRUFRAC® COMPOSITE PLUG 16

  17. Slide 17: Small Choice, Big Impact

    Small Choice BIG IMPACT The Obvious Choice TRUFRAC® COMPOSITE PLUG

Weatherford International — Technical Presentation (October 2019) on 6ix