Mondelez International, Inc. · NASDAQ:MDLZ
Mondelez International — MEU Supplier Webinar 2019
80 slides from Mondelez International's conference presentation, April 2019
Slide 1: MEU Supplier Webinar April 2019
MEU SUPPLIER WEBINAR April 2019 y Mondelez, SNACKING MADE RIGHT
Slide 2: Thank you for attending
Thank you for attending • You have been invited as we value you as a supplier to our great company • The webinar will be recorded, all participants will be muted • The The webinar will take approximately 1hr 15 minutes and you have 4 speakers. It will be in English, please note this is the second la
Slide 3: Extraneous Matter, Allergens, Pest Control
Extraneous Allergens Pest Matter Control
Slide 4: Webinar objectives
To share with you some key MDLZ requirements To help understanding and develop our working relationship To reduce our defects and help improve supplier performance
Slide 5: Root Cause Analysis & CAPA, Extraneous Matter, Pest Control, Allergens
1 Root Cause Analysis & CAPA 2 Extraneous Matter Management 3 Pest Control 4 Allergen Management
Slide 6: Root Cause Analysis
Global Supplier Quality ROOT CAUSE ANALYSIS Mondelez ational e SNACKING MADE RIGHT
Slide 7: Purpose of root cause analysis
Show the tools and methodologies used for Problem Solving, ensuring critical, deep analyzes that generate positive results for the Supplier and MDLZ receiving plant. To help suppliers ensure we do not receive defects and we remove business disruption from supplier related issues. We improve our supp
Slide 8: Finding root cause: where we can improve?
FINDING ROOT CAUSE: WHERE WE CAN IMPROVE? Phenomenon Cause (Result) Phenomenon Cause (Result) Cause Phenomenon Keep going until you have the Verification (Result) root cause !! Verification Phenomenon Verification (Result) Bulb replace is Example: immediate action, Projector does not work – after al
Slide 9: So where do we start?
International SNACKING MADE RIGHT
Slide 10: Clarifying and focusing in the problem 5W+1H
CLARIFYING AND FOCUSING IN THE PROBLEM 5W+1H 10
Slide 11: The problem statement: 5W+1H
THE PROBLEM STATEMENT: 5W+1H To create a focused problem statement ask clarifying questions: ... do you see, what is issue do you want fixing? What is wrong? What... What broke / failed? (The component and its characteristics) … do you see the problem happening? In particular region, in a category,
Slide 12: Defining the problem (5W1H) example
2. Define the Problem (5W1H) 2.1 What? (Material: What is wrong? What broke / failed? Component and its characteristics) Conveyor left side damaged, losing parts and impacting on product's quality 2.2 Where? (Location: which system / subsystem / position is the component of the break / failure / iss
Slide 13: Fishbone Diagram
WHAT NEXT ? LOOKING ImprovingFOR ABNORMALITIES ability to find abnormalities Fishbone Diagram 13
Slide 14: Right people involved on analysis and solution
100% Participation to get ZERO losses ROOT CAUSE ANALYSIS Do we really have right people involved on analysis and solution?
Slide 15: How to create fishbone diagram
HOW TO CREATE FISH BONE DIAGRAM Brainstorm all potential root causes of the problem with the team and prioritise them 3.1 Fishbone (Ishikawa) Diagram: Brainstorm all potential root causes of the problem with the team and prioritise them from 1 to 5 (1 is the most important) Machine Material Conveyor
Slide 16: 5 Whys
FINDING ROOT CAUSE AND REVIEWING STANDARDS 5 Whys 16
Slide 17: Finding root cause and reviewing standards
FINDING ROOT CAUSE AND REVIEWING STANDARDS 3. Continue Why until 1. Bring the issues / abnormalities 2. Always check for logical factor leading to identified in the fishbone diagram and correctness by tracing countermeasure to prioritized as potential cause. For each phenomenon from last prevent rec
Slide 18: Potential causes from fishbone diagram
Priority WHY ? WHY ? WHY ? WHY ? WHY ? Edge went up Guide locked 1 Conveyor loosing parts Conveyor left side damaged on the left side Feeder guide out of position incorrectly after Potential causes from Fishbone Diagram guide cleaning WHY ? WHY ? WHY ? WHY ? WHY ? Conveyor Correction Rod has passed
Slide 19: Quiz: best way to conduct a root cause analysis
• Which of these options do you think is the best way to conduct a root cause analysis ? • A/ Fix the issue like last time because you know what the issue was • B/ Gather team of managers and expert in an office And brainstorm • C/ Gather team of operators, technicians, process experts, encourage al
Slide 20: 5 Whys exercise - Jefferson Memorial
5 5WHYS WHYSEXERCISE EXERCISE- JEFFERSON - JEFFERSONMEMORIAL MEMORIAL Jefferson Memorial Structure Structure was deteriorating Deteriorating Why ? Using harsh chemicals Why ? To clean pigeon droppings Why ? Root Cause They eat spiders& there are a lot of spiders at monument Why ? They eat mosquitos
Slide 21: Action Plan for Countermeasures
ACTING TO ERADICATE THE PROBLEM CAUSES Action Plan for Countermeasures 21
Slide 22: Action plan example
ACTION PLAN EXAMPLE ROOT 4. Actions: Containment or Root Cause elimination 5. Responsibilities 6. Status CAUSES Write down the actions related to each root cause and specify if Ensure all actions Name Date they are containment or root cause elimination are closed Guide locked Carla 27-jun OK incorre
Slide 23: Common root cause analysis mistakes
1. Poor problem definition (use of 5W+1H) 2. Jump to conclusions, not applying problem solving sequence and techniques 3. Blame people, ignore systems design/methods 4. Not confirming likely causes 5. Stopping at 2nd or 3rd why when it gets difficult to put right 6. Tackling problems without underst
Slide 24: Quiz: metal filings in chocolate mass
Problem: Metal filings were found in the bulk chocolate mass. Which of these do you think is the most likely root cause of this issue ? • A/ The pump that pumps the mass to the holding tank failed • B/ The magnet wasn’t strong enough • C/ The pump had not been maintained • D/ The pump had not be ide
Slide 25: Appendix: Mondelez Standard RCA Template
APPENDIX: MONDELEZ STD RCA TEMPLATE Model A – recommended format for us to have consistent application, but there are others which do the same job. The key is to get to the root cause in a way you can understand
Slide 26: 5 Why examples; tip on the 5th Why
Metal filings found in the Glucose syrup delivered was Incorrect shelf life on the chocolate too thick too pump finished good Why ? Why ? Why ? The pump failed from loading Viscosity was not correct Wrapping leg 5 printed the tank 10 wrong date Why ? Why ? Why ? There was sheer causing The temperatu
Slide 27: Supplier Quality Expectations manual: corrective and preventive actions
• All programs in the Supplier Quality Expectations (SQE) Manual require that Corrective and/or Preventive Actions be taken in the event of non-conformances. The requirements: • The Supplier shall have an effective C&PA program tracking such actions to ensure that non-conformances in any program are
Slide 28: Quality Notifications raised against suppliers
In response to Quality Notifications being raised against you as a supplier. A formalised process shall be in place to identify root cause for Quality Notifications (QNs) P1 and P2 as a minimum
Slide 29: When to use RCA and notification requirements
RCA should be used to investigate causes of significant events that effect Mondelez. These can be but not limited to: - Positive pathogen results in product or environmental swabs - Inadvertent release of held product to MDLZ - Identification of an unlabelled / undeclared allergen ENSURE YOU ARE FAM
Slide 30: Extraneous Matter Control
EXTRANEOUS MATTER CONTROL Supplier We binar 2019
Slide 31: What are foreign bodies?
What are Foreign Bodies? • Foreign Bodies are extraneous matter not normally found in food. - Consumer Dislike? • Physical hazards include any potentially harmul extraneous matter. o Dental damage o Laceration to gum/mouth o Choking
Slide 32: What is extraneous matter management?
What is Extraneous Matter Management? Extraneous Matter Management is about creating a manufacturing environment which prevents foreign objects being introduced into the product. Controls include raw materials (supplier control), equipment design, GMP and plant environment. The site shall have an ef
Slide 33: Minimizing extraneous matter risk
Minimizing Extraneous Matter Risk: Designing the risk of • Detection and extraneous matter removal of out of the process Preventing extraneous matter (e.g. eliminating introduction of (e.g. screens, metal to metal extraneous matter filters, magnets, contact on into the product sieves, metal equipmen
Slide 34: Preventive actions
Preventive actions: • GMP (Operators, Raw materials, work in progress…) • Maintenance (tools, equipment and line maintenance) • Equipment design • Environment, Sanitation Keep product/ingredients covered Inspect and replace brushes with loose or missing bristles No Yes No peeling or actively flaking
Slide 35: Preventive actions
Preventive actions: Do not use tape, cardboard, twist ties or wire for temporary repairs Do not improperly store food contact tools/brushes Repair and check hard plastic & glass
Slide 36: Extraneous matter devices - focus areas
Extraneous Matter Devices - Focus areas : These devices shall be used in such a way to maximize their effectiveness. • Location of the detection devices in the production line, • Procedures to manage the devices, • Start-up set up (e.g. check if magnet is in place; screen is properly seated in its h
Slide 37: Quiz: EU Rapid Alert System alerts 2017
Do you know how many alerts for Extraneous Matter contamination have been reported in the EU Rapid Alert System for Food and Feed during 2017: • A/ 116 • B/ 30 • C/ 77
Slide 38: Devices to control extraneous matter and limitations
What devices do we have to control extraneous matter? Limitations Magnets Metal Detectors X-Rays
Slide 39: Metal detector requirement: sensitivity
Metal detector requirement : Sensitivity • Detection equipment settings shall be determined and applied to achieve the most sensitive level possible to provide maximum protection from metal contamination. The detection sensitivity under production conditions must be better than 5mm for all metals. •
Slide 40: Metal detector requirement: verification
Metal detector requirement : • Functionality verification for electronic detection and rejection devices shall take place during production with the normal product flow. • 2 passes of each test piece (ferrous, non-ferrous and stainless steel) must be detected and rejected. • Consideration should be
Slide 41: Factors that limit metal detector sensitivity
Factors that Limit Sensitivity of Metal Detector : • Type of Metal • Shape and Orientation • Aperture size/ Metal position in the aperture • Environmental conditions : Electrical interferences, plant vibration, temperature fluctuations • Inspections speed • Product characteristics : wet, dry, salty,
Slide 42: Usage and placement of detection devices
Usage and Placement of Extraneous Matter Detection Devices : • The metal or X-ray detection must be at the end of the production line after product packaging. – If not feasible or practical the detector shall be placed before, but as close as is practical to the point where the product enters the pa
Slide 43: Quiz: extraneous matter management definition
What is the Extraneous Matter Management definition? Select correct answer: • A/ A documented risk assessment, which is part of the HACCP plan of the production site • B/ The control of Extraneous Matter which can pose a concern for human health • C/ A system of control of Extraneous Matter by desig
Slide 44: Pest Management
Mondeléz International eo SNACKING MADE RIGHT PEST MANAGEMENT
Slide 45: Pest management objectives
• Be familiar with Mondelez requirements • Understand and identify the risks associated with pests. • Review the performance of outsourced services. • Perform inspections and audits. • Initiate appropriate corrective measures in case of infestation.
Slide 46: The Iceberg
THE ICEBERG 3 ~~ SNACKING MADE RIGHT
Slide 47: Integrated pest management program
• A program to prevent the entry of pests and to remove the living conditions that may support their survival and reproduction. • Integrated Pest Management is not the application of a single reactive method, but a combination of measures, evaluations, decisions and escalation protocols in an econom
Slide 48: Pest control program must include
MUST BE Why? To monitor and control pest activity in the facility and the surrounding area effectively. What should be included? : ✓ Pest management plans, methods, schedules ✓ Inspection procedures and frequencies. ✓ Required documentation of pest activity log and analysis of records for trends in
Slide 49: Keeping pests out of the building
Efforts must be made to keep pests out of the building. It is necessary to take measures to prevent the penetration of pests into the building, through the control of external territory.
Slide 50: Mouse
Mouse • No water source needed • Fits through an opening of 0.5 cm / 0.2 inches • Eats at different places (up to 30) • 3-4 g. of food / day is sufficient, Thus, a mouse can live completely hidden from us before infestation starts.
Slide 51: Rat
Rat • Needs water sources Norway Rat • Fits through an opening of 1.25 cm • Active at night • Afraid of new situations • Rats usually live on the outside and only enter the plant to find food. • A rat is a very clever, social living in a hierarchical system.
Slide 52: Pest control contractors and methods
• Pest control activities shall be performed by certified pest control contractors or personnel with equivalent training. • Non-chemical methods, such as traps or glue- boards (in some countries this is not allowed; if it is, the trap needs to be checked every day) are preferred to control rodents i
Slide 53: Pesticide use requirements
• The supplier must follow local The labels and material safety certificates or legislation when applying pesticides. similar documents, shall be available and well maintained at the facility where • The employees must pass the the pesticide is used. corresponding training. Info to be indicated in t
Slide 54: Pesticide disposal and baits
MUST BE • Disposal of unused pesticides and of empty pesticide containers must comply with applicable regulatory requirements. • Baits shall be used in situations where a specific pest is the target. Where used, bait must be placed in secured bait stations (e.g. securely anchored to the ground or bu
Slide 55: Insect light traps
• It shall be utilized as surveillance devices to monitor flying insect activity. • They are not considered to be a control method. • Light bulbs from the insect light traps must be kept clean and be replaced regularly (minimum annually; recommendation: in the beginning of the season) to ensure maxi
Slide 56: Detecting pest infestation and corrective actions
What should I look for, minimally, to detect pest infestation: • To follow 0 tolerance target • Trends • Are rodents caught? Where? How many? • Number of pheromone / light traps for insects? • Pest Control Reports • Pesticide Treatment Log Documented corrective actions: • Increase the number of trap
Slide 57: Quiz: pest activity monitoring
• If you didn’t find any pest activity in 2018 it is not required to monitor further the activity in 2019. • A/ True • B/ False
Slide 58: Signs of rodents, insects and birds
Rodents: Insects Birds Rodents droppings • Insects traces •Birds droppings • Rodents traces • Light traps full with insects •Large number of • Bite traces feathers • Nests • Insects themselves •Nests • Rodents themselves
Slide 59: Inspection checklist for pest control
• Areas (boxes, old equipment): dark • Doors, lids, windows are places, warehouses (back side of the protected with screens and racks) tightly fixed. • Pallet inspection, • Holes in walls for pipes are • Tamper-proof traps with bait sturdy sealed. construction, securely installed. • Windows and lids
Slide 60: Trends: pests activity
TRENDS pests activity 100,00% 80,00% 60,00% 40,00% 20,00% 0,00% Pests activity in the traps: # 26-47 Finished Goods Warehouse, Production 1st floor # oftraps % % 16.10.2016 = 15.11.2016 13.12.2016 D Mondeléz, International SNACKING MADE RIGHT
Slide 61: Pictures with the circle of defence
Pictures with the circle of defence
Slide 62: Trap location plan
260 261 262 17м 259 15м 16м 14м 18м 13м 263 12м 19м 264 265 3х ТП 266 20м 21м 31м 3о 30м 63м 5о 11м 10м 29м 9о 43м 2х 258 4о 267 268 22м 4х 48м 64м 6х 49м 28м 44м 9м 1х 2о 24м 42м 269 28 23м 32м 41м 45м 35м 36м 47м 25м 5т 39м 40м 46м 10т 30 66м 65м 5х 7о 8о 51м 50м 257 6о 37м 38м 10о 26м 8м 34м 1о 2
Slide 63: Quiz: pest control contractor responsibility
• In case Pest control activities are being performed by an External company (contractor) there is no need in site/plant employees involvement as it is the Contractor's total responsibility. • A/ True • B/ False
Slide 64: Allergens
ALLERGENS Supplier Webinar 2019 Mondeléz, International SNACKING MADE RIGHT
Slide 65: Food allergy overview
• Food allergy always involves the activation of the body’s immune system – it wrongly identifies harmless substance as being a threat • Harmless substance = allergen (protein) • Estimated food allergy in Europe, USA, Canada and Australia 1 – 2% adults; 5 – 8% children* *Many infants out-grow some a
Slide 66: Food allergy, carry over and cross contact definitions
Food allergy: The immune-mediated state of hypersensitivity resulting from exposure to a food-borne allergen (usually a protein or glycoprotein). Normally developing serious reactions and even causing deaths. Carry over: Traces of product from the previous product run which cannot be adequately clea
Slide 67: Food intolerance, aversion and sensitivity
• Food intolerance – Does not involve the immune system – Reactions less severe (not fatal) – MDLZ MSI (cereals containing gluten) • Food aversion – Psychological condition (don’t like it) • Food sensitivity – Reaction to chemical element of food (caffeine, aspartame) – Can have symptoms similar to
Slide 68: Coeliac disease
• Auto-immune condition • Triggered by sensitivity to gluten in cereals • Estimated coeliac disease worldwide (Europe, North America, Middle East, India) – Many (up to 75% not diagnosed) – 0.5-1% adults – up to 2-3% in Scandinavia / Ireland • Other reactions to wheat – Wheat allergy – Wheat intolera
Slide 69: Allergy symptoms
• Oral allergy syndrome • Nettle rash or urticaria • Swelling – particularly lips, mouth and throat • Difficulty in swallowing or speaking • Abdominal pain, diarrhoea, nausea or vomiting • Breathing difficulties (asthma strongly linked to severe allergy) • Sudden feeling of weakness (drop in blood p
Slide 70: Major allergens list
– Crustacean Almond – Eggs Brazil Nut – Fish Cashew – Milk e.g. Cows, Goats, Sheep's Hazelnut (Filbert) – Molluscs Macadamia Nut – Peanut - Tree Nuts Pine Nuts (Pinyon) Pistachio – Seeds- Sesame Seeds Pecan Walnut Hickory 1 – Soybean Chestnut 1 – Celery – Wheat – Mustard – Lupines – Sulphites2 1 Hic
Slide 71: True allergens are proteins
• True allergens = always proteins • Most allergen incredibly stable molecular structures • Some resistant to processing • Heat treatment • Mechanical • Fermentation • Some rendered ‘more’ allergenic
Slide 72: Quiz: which sentence is true?
Which sentence is true ? Select correct answer: • A/ Crustacean, egg, milk doesn’t belong to allergens • B/ Food allergy always involves the activation of the bodie’s immune system
Slide 73: Managing allergens: hierarchy of controls
What can we do to manage allergens? Based on a hierarchy of controls: 1.- Avoid the introduction of an allergen into a facility that did not already contain the allergen. 2.- Total dedication and segregation (of lines where possible) or equipment. 3.- Extensive, well-documented cleaning and inspecti
Slide 74: Physical barriers
• Physical barriers: • Separate reception and storage areas • Dedicated manufacturing areas within the factory: - Air extraction/filtration systems - Control of personnel, packaging materials, ingredients and finished products • Identification of shared equipment and its ability to be dismantled
Slide 75: Designing out allergens, safe raw materials, training
• Allergens should be designed-out: - Use non-allergenic substitutes - Avoid cross-contamination from other lines or other production areas Ensure a safe raw materials supply: - Audit suppliers’ allergen management program - Contract/Specification review - Notification of any formulation change Trai
Slide 76: Production scheduling and rework handling
• Production scheduling: - Avoid manufacturing carry-over - Schedule allergen-containing products last in the production sequence - Schedule all products containing the same allergen in the same run - Schedule long runs of allergen-containing products - Provide sufficient time to do a thorough aller
Slide 77: SQE requirements and useful links
SQE Requirements • All allergens should be clearly labeled; • Where a new allergen is identified in a product where it was not previously present, and is therefore not labeled (e.g. discovery of an allergen cross-contact or change to the allergen profile of a raw material), MG must be notified immed
Slide 78: Quiz: avoiding cross-contamination from adjacent lines
What should be implemented to avoid cross- contamination coming from adjacent lines with different allergen profiles? Select correct answer: • A/ to provide segregation of tools and equipment • B/ nothing is required • C/ provide sufficient time to do a thorough allergen clean
Slide 79: Questions?
QUESTIONS?
Slide 80: Next steps
ΕΥΧΑΡΙΣΤΟΎΜΕ Next steps: We have collected all your questions throughout the webinar The team will answer them and return a Q&A style document to you along with the presentations You can also reach out to your usual Supplier Quality contact should you require further assistance Support information i