DuPont de Nemours, Inc. · NYSE:DD

DuPont de Nemours — DuPont — Technical Presentation (2006)

40 slides from DuPont de Nemours's technical presentation, 2006

  1. Slide 1: Microlithographic Polymer Films - MPF

    Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies Microlithographic Polymer Films - MPF™ A Dry Film Lithography Solution for Advanced Packaging Pedro Dias Jorge Senior Product Manager DuPont Advanced Packaging Lithography Technology Roadshow 2006 for Advanced Packaging, MEMS

  2. Slide 2: Agenda

    Microlithographic Polymer Films - MPF™ A Dry Film Lithography Solution for Advanced Packaging Agenda - WBR Series – Multi Purpose High Resolution Dry Film Photoresist - Experiment 1 - Evaluation of process window using mask aligner - Experiment 2 - 200 mm lithography and via geometry using mask alig

  3. Slide 3: MPF Dry Photoresist Films

    MPF TM Dry Photoresist Films Dry Photoresist Films WBR Series Thick and Ultrathick Dry Photoresist for wafer bumping and other applications requiring thick electroplating or photostencil deposits MX Series Multipurpose Dry Photoresists, etching and electroplating properties for MEMS and RDL applicat

  4. Slide 4: MPF WBR series

    MPF WBR series TM Multi Purpose High Resolution Dry Film Photoresist • Negative working, aqueous developable dry photoresist film • Available with 50, 75, 100, 120um thickness • Suitable for wafer bumping processes, both for electroplating and photo stencil ¾ Compatible with acid copper, tin, tin/le

  5. Slide 5: MPF WBR series: Automatic Dry Film Lamination Systems

    MPF WBR series TM Multi Purpose High Resolution Dry Film Photoresist Automatic Dry Film Lamination Systems • Plate and Hot roll temperature: 85~110C(185~230F) • Speed: 0.6~1.5m/min (2~5ft/min.) • Pressure 2 – 6 bar (30-90 psi) Courtesy of Microcontrol Electronic Technology Roadshow 2006 for Advanced

  6. Slide 6: MPF WBR series: No Edge Bead

    MPF WBR series TM Multi Purpose High Resolution Dry Film Photoresist No Edge Bead Spin on Liquid MPF - Dry FilmPhotoresist TM 5.5 mm less usable area due to edge bead Maximized usable area Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  7. Slide 7: Experiment 1: Conditions and Equipment Information

    Processing Conditions and Equipment Information Lamination, Exposure, Development Experiment 1 Evaluation of process window using mask aligner Microcontrol Leonardo 200 Film Type: : DuPont MPF® WBR series 75 um Laurell WS 400B Spray tool Lamination Temp : 105 C Lamination Speed : 0.5 m/min Film Type

  8. Slide 8: X-Section – MA150/SUSS

    Processing Information and Results X-Section – MA150/SUSS 50um Line/ “X” um Space WBR-75(75umt) / Exposed by MA150 200mJ/cm2 300mJ/cm2 400mJ/cm2 500mJ/cm2 X= 30um X=40um X=50um Exposure : Courtesy of SUSS MicroTec, Yokohama Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  9. Slide 9: CD control data – MA150/SUSS

    Processing Information and Results CD control data – MA150/SUSS 1.20 1.00 0.80 30um 40um CD 0.60 0.40 50um 0.20 0.00 0 100 200 300 400 500 600 700 Exposure dose(m J/cm 2) 1.20 TOP 1.00 0.80 30um 40um CD 0.60 0.40 50um CEN 0.20 0.00 0 100 200 300 400 500 600 700 Exposure dose(m J/cm 2) BTM 1.20 1.00

  10. Slide 10: Summary of Experiment 1

    Processing Information and Results Summary of Experiment 1 - Robust exposure latitude Shown good resolution under wide exposure dose conditions. (200-600mJ/cm2 with broad band UV light) - Resolution Achieved 2.5 aspect ratio at optimized exposure condition (200-400mJ/cm2 with broad band UV light for

  11. Slide 11: Experiment 2: Conditions and Equipment Information

    Processing Conditions and Equipment Information Lamination, Exposure, Development Experiment 2 200 mm lithography and via geometry using mask aligner Microcontrol Leonardo 200 Film Type: : DuPont MPF® WBR series 100 um Lamination Temp : 105 C SUSS MicroTec ACS200 Spray tool Lamination Speed : 0.5 m/

  12. Slide 12: X-Section – MA200/SUSS

    Processing Information and Results X-Section – MA200/SUSS WBR-100(100umt) / Exposed by MA200 60um 80um 100um 120um Circle Via Hexagon Via Square Via Exposure : Courtesy of Fraunhoffer IZM Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  13. Slide 13: Summary of Experiment 2

    Processing Information and Results Summary of Experiement 2 - Resolution Material is capable of <150 um pitch circle/square/polygon via pattern with 100um thickness at optimized process conditions. - Side wall geometry Cross section profile show no undercut, vertical profile without footings or resi

  14. Slide 14: Experiment 3: Conditions and Equipment Information

    Processing Conditions and Equipment Information Lamination, Exposure, Development Experiment 3 The impact of high intensity exposure MPA Microcontrol Leonardo 200 Film Type: : DuPont MPF® WBR series 100 um Lamination Temp : 105 C SUSS MicroTec ACS200 Spray tool Lamination Speed : 0.5 m/min Film Type

  15. Slide 15: X-Section – MPA

    Processing Information and Results X-Section – MPA WBR-100(100umt) / Exposed by MPA500 20um Line 30um Line 40um Line 60um Line 300 mJ/cm2 400 mJ/cm2 500 mJ/cm2 Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  16. Slide 16: X-Section – MPA

    Processing Information and Results X-Section – MPA WBR-100(100umt) / Exposed by MPA500 20um Line 30um Line 40um Line 60um Line 600 mJ/cm2 700 mJ/cm2 800 mJ/cm2 900 mJ/cm2 Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  17. Slide 17: CD control data - MPA

    Processing Information and Results CD control data - MPA C D (T O P ) 1.60 1.40 1.20 20um CD 1.00 30um 0.80 40um 0.60 60um 0.40 100 200 300 400 500 600 700 800 900 Exposure D ose(m J/cm 2) TOP C D (M ID ) 1.60 1.40 1.20 20um CD 1.00 30um 0.80 40um 0.60 60um MID 0.40 100 200 300 400 500 600 700 800 9

  18. Slide 18: Summary of Experiment 3

    Processing Information and Results Summary of Experiment 3 -Robust exposure latitude Shown good resolution under wide exposure dose conditions. (300-900mJ/cm2 with broad band UV light) -Resolution Increase resolution due to the high intensity exposure source. Achieved 4:1 aspect ratio at optimized e

  19. Slide 19: Experiment 4: Conditions and Equipment Information

    Processing Conditions and Equipment Information Lamination, Exposure, Development Experiment 4 Evaluation of process window using stepper Takatori ASTM4000 Film Type: : DuPont MPF® WBR series 120 um SUSS MicroTec ACS200 Spray tool Lamination Temp : 80 C Lamination Speed : 1.2 m/min Film Type: DuPont

  20. Slide 20: X-Section – Ultratech AP300

    Processing Information and Results X-Section – Ultratech AP300 WBR-120(120umt) / Exposed by AP300 Off 440mJ/cm2 560mJ/cm2 680mJ/cm2 800mJ/cm2 set -50 µm -40 µm -30 µm Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  21. Slide 21: X-Section – Ultratech AP300

    Processing Information and Results X-Section – Ultratech AP300 WBR-120(120umt) / Exposed by AP300 Off 440mJ/cm2 560mJ/cm2 680mJ/cm2 800mJ/cm2 set -20 µm -10 µm ±0 µm Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  22. Slide 22: X-Section – Ultratech AP300

    Processing Information and Results X-Section – Ultratech AP300 WBR-120(120umt) / Exposed by AP300 Off 440mJ/cm2 560mJ/cm2 680mJ/cm2 800mJ/cm2 set +10 µm +20 µm +30 µm Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  23. Slide 23: Summary of Experiment 4

    Processing Information and Results Summary of Experiment 4 -Robust exposure latitude Shown good resolution under wide exposure dose conditions. (500-800mJ/cm2 with broad band UV light) -Resolution Achieved 2:1 aspect ratio at optimized exposure condition for 120 um film -Side wall geometry Cross sec

  24. Slide 24: Experiment 5: Conditions and Equipment Information

    Processing Conditions and Equipment Information Lamination, Exposure, Development Experiment 5 Initial evaluation of process window using maskless laser direct imaging Microcontrol Leonardo 200 Film Type: : DuPont MPF® WBR series 75 um Lamination Temp : 105 C Laurell WS 400BSpray tool Lamination Spe

  25. Slide 25: X-Section – Orbotech Paragon

    Processing Information and Results X-Section – Orbotech Paragon WBR-75(75umt) / Exposed by Paragon 35um Line 60um Line 80um Line 150 mJ/cm2 250 mJ/cm2 Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  26. Slide 26: CD control data - Orbotech

    Processing Information and Results CD control data - Orbotech 1.2 1.1 1 30um 0.9 40um CD 0.8 0.7 50um 0.6 TOP 60um 0.5 0.4 80um 150 190 250 300 360 100um Exposure dose(m J/cm 2) 1.2 1.1 1 30um TOP 0.9 40um CD 0.8 0.7 50um 0.6 MID 60um 0.5 0.4 80um MID 150 190 250 300 360 100um Exposure dose(m J/cm 2

  27. Slide 27: Summary of Experiment 5

    Processing Information and Results Summary of Experiment 5 -Robust exposure latitude Shown good resolution under wide exposure dose conditions for Laser Direct Imaging (150-250mJ/cm2) -Resolution Achieved 2:1 aspect ratio at optimized exposure condition for 75 um film -Side wall geometry Cross secti

  28. Slide 28: Experiment 6: Conditions and Equipment Information

    Processing Conditions and Equipment Information Lamination, Exposure, Development Experiment 6 Evaluation of TMAH development compatibility Microcontrol Leonardo 200 Film Type: : DuPont MPF® WBR series 75 um Lamination Temp : 105 C SUSS MicroTec ACS200 Spray tool Lamination Speed : 0.5 m/min Film Ty

  29. Slide 29: X-Section WBR-100 TMAH Development

    Processing Information and Results X-Section WBR-100(100umt) /TMAH Development 30um Line 40um Line 60um Line 80um Line 300 mJ/cm2 400 mJ/cm2 500 mJ/cm2 Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  30. Slide 30: X-Section WBR-100 TMAH Development

    Processing Information and Results X-Section WBR-100(100umt) /TMAH Development 30um Line 40um Line 60um Line 80um Line 600 mJ/cm2 700 mJ/cm2 800 mJ/cm2 Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  31. Slide 31: CD control data

    Processing Information and Results CD control data C D (T O P ) 1.60 1.40 1.20 30um CD 1.00 40um 0.80 60um 0.60 80um 0.40 100 200 300 400 500 600 700 800 900 Exposure D ose(m J/cm 2) C D (M ID ) TOP 1.60 1.40 1.20 30um CD 1.00 40um MID 0.80 0.60 60um 80um 0.40 100 200 300 400 500 600 700 800 900 Exp

  32. Slide 32: X-Section Comparison

    Processing Information and Results X- Section Comparison 20um Line 30um Line 40um Line 1wt% Na2CO3 @400mJ 2.38wt% TMAH Not Open @700mJ Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  33. Slide 33: Summary of Experiment 6

    Processing Information and Results Summary of Experiment 6 -Robust exposure latitude Shown good resolution under wide exposure dose (300-800mJ/cm2) -Resolution Achieved 3:1 aspect ratio at optimized exposure condition for 100 um film -Side wall geometry Cross section show no undercut, straight side

  34. Slide 34: Application: Stencil Printing Process

    Processing Information and Application Stencil Printing Process Photoresist: MPFTMWBR075 Surface: BCB Exposure: Suss MA200 Paste: Mitsubishi 310C reflow Remover EKC108™ 65C/45min Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

  35. Slide 35: Application: Plating Process – 80 um Cu pillar and Sn cap

    Processing Information and Application Plating Process – 80 um Cu pillar and Sn cap Photoresist: MPFTMWBR075 Surface: Cu Exposure: Suss MA200 Plating Eletrolytes : Enthone chemistry Remover EKC108™ 85C/15min Courtesy of IZM Fraunhoffer Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanote

  36. Slide 36: Application: Plating Process – 80 um Cu pillar and AgSn cap

    Processing Information and Application Plating Process – 80 um Cu pillar and AgSn cap Photoresist: MPFTMWBR100 Surface: Cu Exposure: Suss MA200 Plating Eletrolytes: Enthone chemistry Remover EKC108™ 85C/15min Courtesy of IZM Fraunhoffer Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanot

  37. Slide 37: Application: Plating Process – 50 um Cu pillar

    Processing Information and Application Plating Process – 50 um Cu pillar Photoresist: MPFTMWBR50 Surface: Cu Exposure: Suss MA200 Plating Eletrolytes: Nexx Plating Tool (Vertical Plating) RH 8540 Courtesy of Nexx Systems Remover EKC108™ 85C/15min Technology Roadshow 2006 for Advanced Packaging, MEMS

  38. Slide 38: Conclusion

    Conclusion - Process - MPFTM WBR series dry photoresist presented a wide process latitude in a variety of process conditions, in respect to lamination, exposure and development. - MPFTM WBR series demonstrated compatibility with both plating and stencil printing techniques for flip chip and other WL

  39. Slide 39: Acknowledgments

    Acknowledgments - IZM Franunhoffer Institute Tobias Baumgartner - Hitachi Chemical DuPont Microsystems - Toshiaki Itabashi - DuPont Electronics Research and Development - USA and Japan - Kendall Greene - Hidehiro Yamada - Suss MicroTech, Yokohama Technology Roadshow 2006 for Advanced Packaging, MEMS

  40. Slide 40: Thank you

    Thank you Technology Roadshow 2006 for Advanced Packaging, MEMS and Nanotechnologies

DuPont — Technical Presentation (2006) on 6ix