Corticeira Amorim SGPS SA · EURONEXT:COR

Corticeira Amorim SGPS SA — Corticeira Amorim — Technical Presentation (November 2008)

27 slides from Corticeira Amorim SGPS SA's technical presentation, November 2008

  1. Slide 1: Analysis of the life cycle of Cork, Aluminium and Plastic Wine Closures

    CORTICEIRA AMORIM A l i off th Analysis the lif life cycle l off C Cork, k Aluminium and Plastic Wine Closures November 2008 3 & 3Š& ECOBILAN

  2. Slide 2: Agenda

    Agenda Introduction General description of the LCA Study R Results lt Conclusions

  3. Slide 3: Agenda

    Agenda Introduction General description p of the LCA Study y Results Conclusions

  4. Slide 4: What is an LCA?

    Introduction What is an LCA? • Method for assessing the environmental Goal and Scope aspects and potential impacts Definition associated with a product system g throughout its life cycle y Inventory Interpretation A l i Analysis • Life cycle thinking: compilation and Impact evaluation of the inputs

  5. Slide 5: LCA procedure

    Introduction LCA procedure • Normalized by ISO standards : ISO 14040-4 - ISO 14040: Principles and framework - ISO 14044: Requirements and guidelines • Critical review: process of ensuring consistency between an LCA and the principles p p and the requirements q of the International Standards on life

  6. Slide 6: Agenda

    Agenda Introduction General description p of the LCA Study y Results Conclusions

  7. Slide 7: Objectives

    General description of the LCA Study Objectives • Main g goal: Evaluation of the environmental impacts p of Cork Stoppers pp versus Aluminium and Plastic Closures • Objectives: Obj ti - To identify opportunities to improve the environmental performance of cork stoppers pp - To provide additional inf

  8. Slide 8: Functional unit

    General description of the LCA Study Functional unit “…sealing a standard bottle of wine bottled and sold on the UK market…” • Each one of the different closures considered on this survey is studied for an identical functional unit • The results are presented using one thousand wine closures as the

  9. Slide 9: Methodology and data used

    General description of the LCA Study Methodology and data used • TEAM™ software • The survey was carried out using the methodology of life cycle analysis (LCA) defined by ISO standards, supported by data from: - different process units of Corticeira Amorim - bibliographic sources, such as internet r

  10. Slide 10: Peer Review

    Results Peer Review An external critical review was performed by three independent entities, namely: • An independent life cycle analysis (LCA) expert - Mr. Mr Yvan Liziard • An independent specialist on cork - Mr. João Santos Pereira - from Instituto Superior de Agronomia of Universidade Técnica de

  11. Slide 11: Environmental indicators used

    General description of the LCA Study Environmental indicators used To evaluate the p potential impacts p of natural and synthetic y wine closures on the environment, the survey included the analysis of seven indicators: - Non-renewable energy consumption - Water W t consumption ti - Emission of gree

  12. Slide 12: Wine closures model

    General description of the LCA Study Wine closures model Cork: raw materials materials, Aluminium, plastic: raw materials stopper production, Production production finishing Cork: all the transportation Aluminium, plastic: transport from into the production process Transport stoppers producer to the

  13. Slide 13: List of excluded life stages

    General description of the LCA Study List of excluded life stages Due to lack of information Due to methodological Due to having negligible In the p public domain reasons impacts p • Paints used in PVC covers • Final destination and • The construction of buildings for cork and plastic closures trans

  14. Slide 14: Agenda

    Agenda Introduction General description p of the LCA Study y Results Conclusions

  15. Slide 15: Non-renewable energy consumption

    Results Non-renewable Non renewable energy consumption Non Renewable Energy (MJ / 1000 closures) 600 End of life 500 400 Bottling g 300 Transport 200 Production 100 0 Cork Aluminium Plastic -100 • Higher non-renewable energy consumption for aluminium and plastic closures, due to energy consumed for

  16. Slide 16: Water consumption

    Results Water consumption Water used (m3 / 1000 closures) 45 40 End of life 35 Bottling 30 25 Transport 20 15 Production 10 5 0 Cork Aluminium Plastic • Plastic closures show the biggest water consumption of all three closures • Water consumption associated to bottling in the case of cork and plasti

  17. Slide 17: Emission of greenhouse effect gases

    Results Emission of greenhouse effect gases IPCC-Greenhouse effect (g CO2 eq. / 1000 closures, direct 100 years) 40.000 35.000 End of life 30.000 25.000 Bottling 20.000 Transport 15.000 10.000 Production 5 000 5.000 0 -5.000 Cork Aluminium Plastic -10.000 • Aluminium closures are associated to the h

  18. Slide 18: Contribution to atmospheric acidification

    Results Contribution to atmospheric acidification Athmosferic acidification (g H+ eq. / 1000 closures) 9 8 End of life 7 6 Bottling 5 Transport 4 3 Production 2 1 0 -1 Cork Aluminium Plastic • Aluminium closures are the biggest contributors to atmospheric acidification, followed by plastic closures

  19. Slide 19: Contribution to the formation of photochemical oxidants

    Results Contribution to the formation of photochemical oxidants WMO-Photochemical oxidant formation (g ethylene eq./ 1000 closures, average) 20 End of life 15 Bottling g 10 Transport 5 Production 0 Cork Aluminium Plastic -5 -10 • Aluminium closures are the biggest contributors to the formation of ph

  20. Slide 20: Contribution to the eutrophication of surface water

    Results Contribution to the eutrophication of surface water Water eutrophication (g phosphates eq. / 1000 closures) 1,0 0,9 End of life 0,8 0,7 Bottling 0,6 0,5 Transport 0,4 Production 0,3 0,2 0,1 0,0 Cork Aluminium Plastic • Plastic closures are the biggest contributors to water eutrophication, fo

  21. Slide 21: Total production of solid waste

    Results Total production of solid waste Waste production (kg / 1000 closures) 8 7 End of life 6 Bottling 5 4 Transport 3 Production 2 1 0 Cork Aluminium Plastic • Aluminium closures are the biggest producers of solid waste, followed by plastic closures • In the case of aluminium closures, production

  22. Slide 22: Summary of the relative performances of the closures

    Results Summary of the relative performances of the closures T Type off stopper t Environmental Indicator Cork Aluminium Plastic Stopper Stopper Stopper Non-renewable energy consumption 1.00 4.33 4.87 Water consumption 1.90 1.00 3.06 Emission of greenhouse gases 1.00 24.24 9.67 Contribution to atmos

  23. Slide 23: Summary of the performances of the closures

    Results Summary of the performances of the closures T Type off stopper t Environmental Indicator Cork Aluminium Plastic Stopper Stopper Stopper Non-renewable energy consumption (MJ/1000 closures) 102,019 441,921 496,747 Water consumption (m3/1000 closures) 25,643 13,479 41,305 Emission of greenhouse

  24. Slide 24: Agenda

    Agenda Introduction General description p of the LCA Study y Results Conclusions

  25. Slide 25: Conclusions – Industrial stages

    Conclusions Conclusions – Industrial stages • The production phase predominates for all the indicators considered (except for solid waste production, where end of life phase predominates) • IIn the th case off corkk stoppers, t bottling b ttli isi the th phase h off th the lif life cycle l with ith

  26. Slide 26: Conclusions – Environmental Impact

    Conclusions Conclusions – Environmental Impact • IIn comparison i tto the th aluminium l i i and d plastic l ti closures, l th the corkk stopper t iis th the best alternative in terms of non-renewable energy consumption, emission of greenhouse effect gases, contribution to atmospheric acidification,

  27. Slide 27: Contacts for further information

    Contacts for further information PwC: Cláudia Coelho [email protected] AMORIM: Carlos de Jesus [email protected] © 2008 PricewaterhouseCoopers. All rights reserved. “PricewaterhouseCoopers” refers to the network 3 & 3Š& of member firms of PricewaterhouseCoopers International L

Corticeira Amorim — Technical Presentation (November 2008) on 6ix