Ryerson Holding Corporation · NYSE:RYZ
Ryerson — Investor Presentation (May 2007)
43 slides from Ryerson's investor presentation, May 23, 2007
Slide 1: Investor Presentation May 2007
EXHIBIT 99.1 Investor Presentation May 2007
Slide 2: Safe harbor provision
Safe harbor provision During this presentation, we will make forward-looking statements subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements. Such risks and uncertainties include, but are not limi
Slide 3: Proxy Solicitation
Proxy Solicitation Important Information Ryerson Inc. plans to file with the Securities and Exchange Commission (the "SEC") and mail to its stockholders a Proxy Statement in connection with its 2007 Annual Meeting, and advises its security holders to read the Proxy Statement relating to the 2007 Ann
Slide 4: Use of non-GAAP financial information
Use of non-GAAP financial information The Company uses the LIFO method of inventory accounting in the U.S., which results in a better matching of costs and revenues than the FIFO method. To supplement its consolidated condensed financial statements presented on a GAAP basis, the company has provided
Slide 5: Agenda
Agenda Historical perspective Short-term improvements Long-term profitable growth 4
Slide 6: Ryerson Facts
Ryerson Facts $6 billion in revenue 100+ locations serving the U.S. and Canada Leading position in stainless steel and aluminum Consolidation in U.S. fragmented service center industry International JVsin high growth emerging markets –Mexico, India and China 5
Slide 7: Rich product mix and end markets
Rich product mix and end markets 2006 revenues by product 2006 sales by end market Other Other Fabrication & 5% 8% carbon plate 9% Carbon flat Transportation rolled Machinery 11% 25% 27% Bars, tubing, structurals 9% Construction, wholesalers, mills 13% Fabricated Electrical metals machinery 28% Stai
Slide 8: Broad geographic footprint
Broad geographic footprint 7
Slide 9: Ryerson: Historical perspective
Ryerson Historical perspective Short term improvements Long term profitable growth 8
Slide 10: Perspective on historical performance and trends
Ryerson: Perspective on historical performance and trends Industry participants • A.M. Castle • Novamerican • Samuel Manu-Tech • Central Steel & Wire • Olympic Steel • Shiloh Industries • Earle M. Jorgensen • PNA Group • Steel Technologies • Gibraltar Industries • Reliance Steel & Aluminum • Worthin
Slide 11: Ryerson's Programs are Producing Results
Ryerson’s Programs are Producing Results Since 1998, Ryerson has implemented significant cost savings initiatives and has steadily improved results relative to peer median over the last 6 years 1 Return on Invested Capital (LIFO companiesadjusted to FIFO) 26.0 Pre- Post- 23.0 Restructuring Restructu
Slide 12: Ryerson's Changing Product Mix
Ryerson’s Changing Product Mix Sales increase of over 100% through organic growth and strategic acquisitions; stainless and aluminum sales have grown to approximately 52% of sales 1998 Sales by Product 2006 Sales by Product $2,783mm $5,909mm Other Fabrication and 5% Other Carbon Plate Fabrication an
Slide 13: Inventory Management
Inventory Management On average, Ryerson’s inventory turnover has been consistently higher than the Metals Service Center Institute’s reported turns 5.0 4.8 4.6 4.4 4.2 Average 4.0 3.8 3.8 3.7 3.6 3.4 3.2 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 YTD Ryerson MSCI Note: 1 Calculated as cost o
Slide 14: Ryerson LIFO Overview
Ryerson LIFO Overview Discussion Ryerson Cumulative EBIT¹ Under Last-In First-Out ("LIFO") the most recently 1,000 938 purchased inventory is costed against sales first 900 853 In any given period, there will be a difference 800 between COGS calculated on a LIFO basis versus COGS calculated on a FIF
Slide 15: Agenda
Agenda Historical perspective Short term improvements Long term profitable growth 14
Slide 16: Opportunities to improve performance short run and grow long-term
Ryerson has opportunities to both improve performance in the short run and achieve long-term profitable growth Short-Term Improvements Ryerson Structure Under-performing markets with targeted savings of $30mm in 70 individual markets; 2007 (before restructuring each has a separate charges, if any) P
Slide 17: Most service center markets performing well; large markets targeted for improvement
Most service center markets are performing well, but 5 large markets targeted for improvement • 53 Markets (90+%) • Average weighted OROOA 14.2% • 80% of sales & assets 15.0% 14.2% 14.2% 5 Service Centers 2005 OROOA Changes in process 2006 OROOA New management in place as of Jan. 1, 2007 10.0% •5 Ma
Slide 18: Remaining Integris integration synergies
Remaining Integris integration synergies $46 million of annualized cost savings through 1Q 2007 15 markets remain with redundant facilities to be consolidated in 2007—10 remaining Complete SAP roll-out to remaining Integris locations by year- end allows 1. Facility consolidation 2. Shut down of Inte
Slide 19: Inventory bulge over 2H06
Inventory bulge over 2H06 Days Sales in Inventory Strong volume, tight supply 1H06 130 125 Market weakens, mills cut 121 122 lead times and ship early 120 during 2H06 115 110 Ryerson and peer 110 inventories grew 105 105 100 Substantial progress in 100 1Q07 vs. peers 95 90 88 88 85 85 80 6/30/06 9/3
Slide 20: Total Inventory through Q1 2007
Total Inventory through Q1 2007 1,200 1,800 Of the Total Increase (12/05-3/07): 41% due to tonnage increase 1,103 1,100 1,083 59% due to price increase 1,052 1,046 1,600 993 1,002 1,000 963 959 899 1,400 900 875 839 848 811 820 805 800 1,200 700 1,000 600 800 500 400 600 1/06 2/06 3/06 4/06 5/06 6/0
Slide 21: Opportunities to improve performance short run and grow long-term
Ryerson has opportunities to both improve performance in the short run and achieve long-term profitable growth Short-Term Improvements Ryerson Structure Under-performing markets with targeted savings of 70 individual markets; $30mm in 2007 (before each has a separate restructuring charges, if any) P
Slide 22: Long-term profitable growth
Ryerson Historical perspective Short term improvements Long-term profitable growth 21
Slide 23: Long-term profitable growth based on three fundamental principles
Long-term profitable growth based on three fundamental principles 1. Focus on operating efficiency 2. Capture organic growth 3. Seek acquisitions and joint ventures to: Structurally enhance competitive positions Provide additional earnings growth in domestic and global markets Part way through a mul
Slide 24: Upgrade information systems with SAP
Upgrade information systems with SAP Consolidate 5 legacy platforms into one Estimated $80 million project to be completed by year-end 2008 Estimated cost reductions alone should generate a high return on the investment Additional benefits: • Seamless link with customers and suppliers • More detaile
Slide 25: Operating efficiency
Operating efficiency Transfer Lean Six Knowledge Sigma Lean Six Sigma problem solving and continuous improvement process to increase operating efficiencies Sell the Target improvements throughout the company/ Change across all strategic initiatives Specific financial goals Quantitative measurement o
Slide 26: Organic growth
Organic growth National Marketing Programs Added 10,000 accounts and $200MM of revenue since 2004 Aggressive • Promotions Leads to trial • Good experience marketing leads to • Targeted and brand retention vertical markets creation • Extensive • Direct outbound external and telesales internal metrics
Slide 27: Acquisition and joint venture strategy
Acquisition and joint venture strategy Service center industry is fragmented and consolidating “Add strength Cross-selling to strength” Completed 8 opportunities Highest overall acquisitions since 1997 potential Won’t overpay Priority on keeping customers and key “Buying a cash employees flow” New m
Slide 28: International JVs provide opportunities in growth markets
International JVs provide opportunities in growth markets JV partners are established local players Can provide services to U.S. customers global operations in Mexico, India and China JV financial performance • Combined sales of JVs exceeds $500MM in 2006 • Five year compound annual growth rate in e
Slide 29: International JVs
International JVs Collado Ryerson Mexico –approximately $75MM of annual Mexico revenue; 50/50 fabrication venture Tata Ryerson India –approximately $200MM of annual revenue India 50/50 venture Indian metals distribution in its infancy Expanded product line to include stainless and fabrication VSC Ry
Slide 30: Opportunities to improve performance short run and grow long-term
Ryerson has opportunities to both improve performance in the short run and achieve long-term profitable growth Short-Term Improvements Ryerson Structure 70 individual markets; each has a separate P&L 3 International JVs Performance differs by market Long-Term Profitable Growth Operating efficiency O
Slide 31: Management and Governance
Management and Governance Ryerson develops its leadership through internal programs and external recruiting Short- and Long-term incentive plans aligned with shareholders Highly qualified board with many years of relevant experience 30
Slide 32: Ryerson leadership development process
Ryerson leadership development process Internal Development External Recruiting Comprehensive training Executives with specialized expertise Early identification of high • Supply chain management potential managers • Operations/lean manufacturing Rotational assignments • Six Sigma Mentoring • Market
Slide 33: Incentive compensation aligned with stockholders
Incentive compensation aligned with stockholders Short- and Long-Term Incentive Plans Short-term incentive: Annual incentive tied to OROOA (operating return on operating assets) Target set by Compensation Committee Corporate staff: Tied to corporate performance Service center staff: Tied to individu
Slide 34: Board of Directors
Board of Directors 40% of the Board has been newly elected in last four years Ryerson’s Board members have a variety of backgrounds in core areas relevant to operations, including complex multi-location service businesses, finance, marketing, technology, M&A and International Board has active operat
Slide 35: Conclusion
Conclusion: In process of multi-year program Short-term benefits Long-term profitable growth 34
Slide 36: Addendum
Addendum © RYERSON 35
Slide 37: Industry Analysis Assumptions
Industry Analysis Assumptions Methodology: • Gross Margin excludes impact of Depreciation and Amortization (D&A); if a company does not break out D&A on the income statement (such as Ryersonpost 2002) 50%of D&A is allocated to Cost of Goods Sold and 50% is allocated to Operating Expenses (unless all
Slide 38: Reconciliation of Certain Non-GAAP Items
Reconciliation of Certain Non-GAAP Items ($mm) 1997 ¹ 1998 ¹ 1999 2000 2001 2002 2003 2004 2005 2006 1Q 2007 Operating Profit 133.1 96.0 97.1 (4.1) (76.0) (7.9) 3.4 99.7 232.9 183.9 69.6 Adjustments: + Gain on Sale of Asset (8.9) (5.9) (1.8) - (1.3) (10.9) - (5.6) (6.6) (21.6) - + Pension Curtailmen
Slide 39: Reconciliation of Gross Margin and Inventory Turns
Reconciliation of Gross Margin and Inventory Turns ($mm, unless otherwise noted) 1997 ¹ 1998 ¹ 1999 2000 2001 2002 2003 2004 2005 2006 1Q 2007 Revenue 2,804.0 2,782.7 2,763.5 2,862.4 2,243.5 2,096.5 2,189.4 3,302.0 5,780.5 5,908.9 1,663.2 Cost of Goods Sold² 2,178.0 2,156.9 2,131.6 2,292.7 1,891.6 1
Slide 40: Reconciliation of Return on Invested Capital
Reconciliation of Return on Invested Capital ($mm, unless otherwise noted) 1997 ¹ 1998 ¹ 1999 2000 2001 2002 2003 2004 2005 2006 1Q 2007 FIFO EBIT² 102.6 48.7 90.9 13.5 (84.9) 17.7 31.7 371.2 147.3 356.1 85.3 Tax-Effected FIFO EBIT³ 66.7 31.7 59.1 8.8 (55.2) 11.5 20.6 241.3 95.7 231.5 55.4 Average P
Slide 41: Business model
Business model Profit drivers and impact Profit drivers Impacted by Volume Manufacturing economy (tonnage) 2 types of customers 50%-60% OEMs—agreements 40%-50% transactional—spot pricing Gross margins Market conditions (gross profit/ton) Buy and sell negotiations Selling prices Material costs Operat
Slide 42: Hypothetical LIFO vs. FIFO
Hypothetical LIFO vs. FIFO- Where is the value during a rising price environment? LIFO Methodology FIFO Methodology 1,400 1,400 Period 1 Period 2 Period 1 Period 2 1,200 1,000 > prot 800 7 600 400 ‘Material Cost 200 0 A ° Average Selling Price Average Selling Price Average Selling Price Average Sell
Slide 43: Recent jumps in metal prices
Recent jumps in metal prices Stainless and Aluminum 4,600 1.4 4,000 1.2 3,400 1.0 2,800 0.8 2,200 1,600 0.6 1,000 0.4 Stainless Aluminum Hot Rolled, Cold Rolled and Plate Prices 850 750 650 550 450 350 250 150 Hot Rolled Cold Rolled Carbon Plate Source: Purchasing Magazine, Bloomberg Notes: 1 Spot p